Nat techhead needs 3D brain transplant

Written By: - Date published: 8:16 am, February 28th, 2014 - 55 comments
Categories: crime, drugs - Tags: , , , ,

What can one say about Maurice Williamson. Is he really as much of a comedian as he appears. Well he pretty much had me in stitches of laughter yesterday morning heading to work.

I mean that it is good that he is looking at the downstream consequences before they arrive. But the examples he was using!

Mr Williamson says the printers are actually manufacturers of products and 3D computer files can be emailed or downloaded from the internet.

He says household printers will soon be able to produce drugs and weapons, and the country’s borders are extremely vulnerable.

“If people could print off … sheets of Ecstasy tablets at the party they’re at at that time, that just completely takes away our border protection role in its known sense.”

His contention is that with the development of 3d printers being so rapid, it isn’t going to be long before they become as ubiquitous as inkjets or laserjets in the hands of potential criminals (aka youth) who will be able to download sophisticated programs to attack him disrupt society. This shows a rather optimistic (ie fantastic) view of the capabilities of the devices, both current and into the foreseeable future. It also ignores that we already have equivalent technologies.

Weapons? The hardest part of any gun to make is  the barrel. This has to withstand the pressure of an explosion inside it for any chemically powered weapon. A gas powered weapon like a air gun is much the same albeit at lower pressures. If you get it wrong then you have a wee bomb in your hand. Sure in theory, a barrel could be made out of sintered metal powders. However the resulting barrel would scare the crap out of even a weapons freak like I have been over the years. Basically you’d want to fire it from remote control, even after it’d be tested many times.

And has Maurice Williamson looked at the costs of second hand CNC milling machines? They aren’t that expensive and they’re ideal for making gun barrels. They’ve been widespread in industrial and engineering plants since I was a kid and the name means “Computer Numerical Control“. In other words these days you typically download, modify, and install a program. Given some decent steel, you’d be able to roll out some pretty decent, cheap, and safe weapons just like a gunsmith I know.

Incidentally guns made out of plastic, wood, pipes, bamboo and many other materials has been around for a very long time. They have never been that popular because they are viewed by everyone who know weapons as being one-shots, and preferably fired from some distance away from our delicate bodies. Just like the glow of the Liberator 3D plastic gun, they are a interesting idea but bloody impractical for any purpose apart from posing.

liberator plastic gun

Or his example about drugs. Perhaps he should look at the do it yourself history of homebake in NZ.

Homebake can be manufactured from over-the-counter and prescription painkillers containing codeine, and was popular in the late 1970s to 1980s due to the crackdown on the heroin supply in this time period. It Is also commonly manufactured from morphine sulfate tablets as the morphine to diacetylmorphine reaction is much more simple than the codeine to morphine process. Clandestine drug laboratories established to homebake heroin have existed in New Zealand since the 1980s

This was eventually dealt with was with careful control of the active ingredients. Now if you look at the chemistry of MDMA, the active part of the drug Ecstasy:

Safrole, a colorless or slightly yellow oily liquid, extracted from the root-bark or the fruit of the sassafras tree is the primary precursor for all manufacture of MDMA.  There are numerous synthetic methods available in the literature to convert safrole into MDMA via different intermediates.

Relatively small quantities of essential oil are required to make large amounts of MDMA. The essential oil of Ocotea cymbarum typically contains between 80 and 94% safrole. This would allow 500 ml of the oil, which retails at between $20 and $100, to be used to produce between 150 and 340 grams of MDMA.

This does suggest to me that there is a much simpler route to control of ecstasy in NZ – the homebake style of control of the precursors. Typically most precursors require a pretty horrendous chemical transformation to be useful. MDMA for instance:-

800px-MDMA_Synthesis_1.svg

500px-MDMA_Synthese_2.svg

For those who didn’t have to suffer through university level organic chemistry (not my favourite subject), there are some pretty serious chemicals used in that synthesis. Each of which can be disrupted in the supply chain.

In theory of course a sufficiently advanced “printing” technology could assemble molecules from elemental atoms. But the probability of anything being capable of actually doing that at a reasonable cost within the next few generations is complete fantasy (probably drug induced).

Most drugs are the same. The active ingredients are usually derived from the natural world which is a lot further on than humans in how to assemble complex chemicals relatively cheaply and at low temperatures and pressures.  Having a drug in a refined form and merely printing it onto a substrate implies that the drug has already been manufactured or imported. Customs and other law enforcement should probably concentrate on those happening.

For that matter, in some ways it is harder to produce good ammunition than it is to produce guns. Perhaps customs and the police should look at how to improve border control on those.

The same thing applies for producing stem cell or cloned cell tissues, one of the more interesting technologies being explored with 3d printers. While it is tempting to consider creating some extra brain tissues to replace those already lost by decayed brain of Maurice Williamson. That too appears to be a long way away.

If you know where you are looking on the net and in the printed literature, you can find just about everything you need to do most things that are known technology already. You could even when I was a kid in the 60s using the Auckland War Memorial museum library to find out all of the interesting techniques used in guerilla warfare in World War 2.

But the really scary thing about this proposal is what Gareth Hughes said on frogblog:

The amazing thing is, Toby Manhire is probably right, it is terrifying he is one of the most qualified people in National to comment on tech issues.

Sure Labour politicians are, in my experience, an interesting mix of being either pretty damn technophobic or having an inept over-enthusiasm for it. But I get the impression that they’ve done some study and thinking on most tech areas I raise with them. However it’d be pretty clear to everyone who has followed 3D printing over the last decade that Maurice Williamson, National’s version of a techhead, appears to be clueless on it.

55 comments on “Nat techhead needs 3D brain transplant ”

  • Comments are now closed

  1. One Anonymous Bloke 1
    28 February 2014 at 8:44 am

    You forgot the potato cannon.

    Williamson should probably take a look at people selling 3D CAD software too, in case it fell into the wrong hands.

  2. karol 2
    28 February 2014 at 8:56 am

    I see the Stuff article by Alex Fensome yesterday is taking the Maurice Williamson line: headline “Printers capable of making guns”.

    Three-dimensional printers can already make guns, and may soon allow people to create gold, gems, food or drugs in their living rooms, the Customs Service has warned.

    It suggests the law needs to be changed to control importing designs for restricted or prohibited goods in the same way as child pornography is restricted.

    A report obtained under the Official Information Act says 3D printers have already been used for criminal activity and to create weapons. In Australia, one was used to make a working “card skimmer” device, which could steal credit card details

    So, while I usually consider Lynn to know way more than me on such matters, I wondered if he had got it wrong with this post, so looked further.

    Today, Alex Fensome in the Dom Post seems to have had a change of heart, having attended to some experts on the matter: “No smoking gun with 3-D printers, experts say”

    The founder of 3-D printer supplier MindKits, Tim Carr, said criticism of the new technology was “infuriating” and 3-D-printed guns posed more of a threat to the person firing it than their target.

    There were much more simple ways to build a gun: “A lathe is more deadly . . . I wouldn’t want to fire a gun made from a 3-D printer. There are so many easier ways to make something more lethal.”

    And a Guardian article from November last year explains just how difficult it is to make a safe-to-use gun from 3 D printing:

    Solid Concepts says that the gun comprised of over 30 3D printed components in stainless steel and a nickel-chromium based superalloy is capable of hitting “a few bulleyes at over 30 yards.”

    However, Solid Concepts stressed that this kind of metal gun cannot be printed using desktop machines – only by using an industrial printer that costs “more than my college tuition”, according to Alyssa Parkinson of Solid Concepts.

    It would have saved me time if I’d just gone with Lynn’s explanation to start with. Clearly he knows way more than Williamson about it, even though Williamson claims to have read up on the matter.

    • Lanthanide 2.1
      28 February 2014 at 9:14 am

      The line about “creating” gold, gems, food or drugs is just mind-boggling.

      • One Anonymous Bloke 2.1.1
        28 February 2014 at 9:19 am

        One quark at a time, presumably.

        • Murray Olsen 2.1.1.1
          1 March 2014 at 2:32 am

          Been a while since I’ve done any particle physics, but I thought quarks couldn’t be isolated because of a detail called asymptotic freedom. Since it has “freedom” in the name, I would have expected NAct to know that.

      • karol 2.1.2
        28 February 2014 at 9:21 am

        Kind of like the ancient art of alchemy.

        • One Anonymous Bloke 2.1.2.1
          28 February 2014 at 9:32 am

          These days, transmuting elements (the alchemical grail) is routine in particle and nuclear physics.

          • lprent 2.1.2.1.1
            28 February 2014 at 1:14 pm

            Just freaking expensive because of the energy and capital requirements.

            • One Anonymous Bloke 2.1.2.1.1.1
              28 February 2014 at 1:44 pm

              Nah, it’s actually cheap, but the scientists involved are part of the Al Gore conspiracy so they funnel the money straight to a secret standing army the UN is building. Luckily we have the Masters of Cyberspace to protect us.

          • McFlock 2.1.2.1.2
            28 February 2014 at 1:31 pm

            Indeed, we can even make antimatter.

            And damned teens could use that to make 10megaton bombs to blow up their school.

            As long as they can afford the $5,200,000,000,000 a gram cost, of course. But it’s something we should be scared of right now.

        • freedom 2.1.2.2
          28 February 2014 at 9:42 am

          There really are people out there who believe 3D printers are some sort of Star Trek molecular synthesiser. (I imagine they are the same people who believe National are paying down debt) But let’s be honest here, if 3D printers had any of that potential they would more closely resemble something from the Sirius Cybernetics Corporation.

          When the ‘Drink’ button is pressed it makes an instant but highly detailed examination of the subject’s taste buds, a spectroscopic analysis of the subject’s metabolism, and then sends tiny experimental signals down the neural pathways to the taste centres of the subject’s brain to see what is likely to be well received.

          However, no-one knows quite why it does this because it then invariably delivers a cupful of liquid that is almost, but not quite, entirely unlike tea.

      • lprent 2.1.3
        28 February 2014 at 1:13 pm

        The line about “creating” gold, gems, food or drugs is just mind-boggling.

        Yep, with gold, the idea of doing some kind of nuclear fusion in a 3D printer is something that I don’t think even the extreme adherent of the technology would think was possible.

        I think they may have gotten it mixed up with the idea of the “Philosophers Stone“

        • Murray Olsen 2.1.3.1
          1 March 2014 at 2:35 am

          The new ACT leader probably thinks the philosophers stone is the currency paid between close relatives for commercial sex.

    • KJT 2.2
      28 February 2014 at 9:28 am

      My high school tech class in the 70’s was making crossbows. Not something which would be allowed now.

      The bolt could go through a small tree at close range.

      The technology, and that to make gun barrels, is available in every engineering workshop in the country.

      Don’t tell Williamson. He will probably want to ban lathes.

      Don’t need fancy 3D printing technology.

      Williamson has always had a fairly loose grasp on reality. Apparent ever since he told farmers that, “opening up the coast” would cause the shipping cartels to lower freight rates.

      • weka 2.2.1
        28 February 2014 at 10:39 am

        “The technology, and that to make gun barrels, is available in every engineering workshop in the country.”

        While I agree that Williamson is being an idiot, I don’t think this comparison fits. The technology to make a gun exists within NZ, but the people capable of using that tech are relatively small compared to the idea that anyone could press a button and print off something dangerous without having to learn any kind of skill. That’s what is scaring the likes of Williamson.

        What annoys me most about Williamson’s ignorance and paranoia is it creates a backlash that carries an implied meme that 3D printing and all new technology is always good for us.

        • lprent 2.2.1.1
          28 February 2014 at 1:35 pm

          …that carries an implied meme that 3D printing … is always good for us.

          In the case of 3D printing as in what is feasible for the next couple of decades, I suspect that it is.

          Consider that I cannot think of a case where a 3D printer could be used as a production line tool. They are simply too slow at making stuff compared to any kind of mass production technique. For instance in plastics materials (the most likely immediate usage), they’d be competing against injection moulding and plastic extrusion/blowing.

          They manufacture large and small objects in a time period that can be counted in seconds. At best for the next couple of decades it is likely that 3D printing equivalent will be measured in hours, and in the case of home equipment the sizes will be pretty small.It will also be correspondingly expensive.

          What 3D printing is damn good at (and how it is used where I work) is making bespoke one-offs. For instance if we need a new design for a electronics case we get one made for us from our CAD designs. While it costs a lot, it allows us to test a design in prototype practice (often several times) before we commit to paying the 10s of thousands of dollars to make a injection die. Before 3D printing we simply wouldn’t have done that degree of testing.

          What it does is reduce our risks, time to production, and time to market.

          The same economics applies in almost every other usage I know of for 3D printing (except possibly for the emerging field of growing biological tissues)

          • Draco T Bastard 2.2.1.1.1
            28 February 2014 at 4:00 pm

            Consider that I cannot think of a case where a 3D printer could be used as a production line tool.

            GE and Rolls Royce can. Of course, that sort of capability isn’t in the at home type of 3D printer – yet.

            At best for the next couple of decades it is likely that 3D printing equivalent will be measured in hours, and in the case of home equipment the sizes will be pretty small.

            Depending upon what’s being created hours may actually be a hell of a lot faster than present methods. As for size, well, this.

            It’s still an emergent technology but I don’t think it’s decades away.

        • KJT 2.2.1.2
          28 February 2014 at 1:48 pm

          Umm. The skills exists in just about anyone who passed 5th form metalwork.

          Not so much now as the academics have this fantasy, that technology is simply to educate designers to design for the Chinese makers.
          The fact that we need about 1 designer for every hundred makers, and the Chinese have plenty of their own, seems to have escaped them.

        • Draco T Bastard 2.2.1.3
          28 February 2014 at 3:43 pm

          but the people capable of using that tech are relatively small compared to the idea that anyone could press a button and print off something dangerous without having to learn any kind of skill. That’s what is scaring the likes of Williamson.

          Nope. What’s scaring the likes of Williamson is that mega-corporations are becoming obsolete. 3D printers will giver everyone the ability to experiment and produce products at home.

          Capitalists are absolutely terrified of competition and 3D printers represent almost unlimited competition.

          • weka 2.2.1.3.1
            28 February 2014 at 6:16 pm

            True. But I also think this is a dog whistle to people* that don’t think like that and instead would be scared of the masses being able to make a gun or drugs at home.

            *I was going to say middle NZ but I’m really sick of that expression and its vagueness.

            • Draco T Bastard 2.2.1.3.1.1
              28 February 2014 at 6:48 pm

              That’s certainly how it’s framed but as bad12 points out, there’s just not that many people who want a gun.

          • lprent 2.2.1.3.2
            28 February 2014 at 9:16 pm

            They really are awesome for prototyping.

  3. felix 3
    28 February 2014 at 9:19 am

    “Having a drug in a refined form and merely printing it onto a substrate implies that the drug has already been manufactured or imported. Customs and other law enforcement should probably concentrate on those happening.”

    Actually I can think of far more important things they should be concentrating on. Why should ecstasy be any concern to them?

    • lprent 3.1
      28 February 2014 at 1:42 pm

      There is always that issue. Personally I have always been of the mind that virtually all recreational drugs should be treated like tobacco and alcohol should be. Legal, regulated strongly (including limited or no advertising), and taxed like buggery to pay for mitigating downstream harm and a good proportion of the money gathered used for explaining the downsides of use.

      Probably wouldn’t stop me from drinking, the only vice that I currently do after I had to give up my tobacco addiction after a heart attack..

      • Lloyd 3.1.1
        1 March 2014 at 12:08 am

        Recreational drugs should be like driving. Driving is potentially dangerous. So is taking drugs.

        Alcohol is a recreational drug, so any rules for other drugs would need to be applied to alcohol too.

        Drivers are tested on their knowledge and have their licence taken off them when they are shown to be too dangerous to leave on the road. Drug takers would need to pass knowledge test(s) about their drug(s) of choice and should have their licence removed when they are shown to be incapable of taking the drug of choice without harming either them selves or others around them.

        Legal drugs would be much cheaper if sold at cost by the state. (Remember state control of alcohol as a choice in elections?) Supply of drugs would need to be absolutely connected to the drug taking licence. Lose your licence and no more drugs. State provided cheap recreational drugs would take any profit in drug dealing away from gangs.

        Random health tests would be a part of the drug licence regime, show signs of serious health effects and you lose your licence. Possession of a licence for certain drugs would mean that certain jobs and probably possession of a driving licence would need to be given up.

        Money spent today on drug squads would be far better spent on health check teams, and extra funding for this could come from the licencing system and drug sales.

  4. One Anonymous Bloke 4
    28 February 2014 at 9:33 am

    It’s sad in a way. The man who gave us the big gay rainbow is clearly a buffoon of the highest order.

    • RedLogix 4.1
      28 February 2014 at 11:04 am

      Yes. It’s not hard to sound plausible when espousing a political ideology – matter how much of a zombie it is.

      Reality is however their undoing.

    • Lanthanide 4.2
      28 February 2014 at 12:19 pm

      I would have thought his comments about big gay rainbows would already have made that clear.

      Sure, maybe it’s a nice soundbite and catchy, but it’s not actually clever or really all that witty.

  5. bad12 5
    28 February 2014 at 9:48 am

    Why anyone would want to indulge in even attempting to ‘print a gun’ off of some laser printer in this country is beyond me,

    If i had a mind to,and i don’t(honest,please believe me),i am pretty sure i could score a working pump action shotgun with the necessary pills to create mayhem in under 2 hours,

    An illegal AK47 would take a couple of days and assembling an arsenal too bulky to carry probably about a week,

    This place is awash with firearms so making dodgy plastic imitations would seem more an item of ‘news’ for its novelty than any actual ability to produce one off of a printer that would have any use other than as a decoration would seem a waste of time and money…

    • weka 5.1
      28 February 2014 at 10:42 am

      That misses the point bad. It’s not the few people like you, it’s the masses that will be able to buy printers.

      • bad12 5.1.1
        28 February 2014 at 12:39 pm

        The day a ‘printer’ can produce gunpowder,a necessary component of a bullet, unless all these masses of printed firearms are to be gas operated, i won’t eat my hat coz i have better uses for it,but, i will be sufficiently contrite,

        The Masses, weka, in case you havn’t noticed need only apply for a firearms license and sit a simple test to enable them access to real fire-arms,

        Hell i know a few who can barely read the Queens English and they have passed the test, as the Post points out a firearm complete with all working parts might be able to be copied in plastic but try firing a bullet out of it and see what occurs…

        • McFlock 5.1.1.1
          28 February 2014 at 1:46 pm

          “gunpowder” is a piece of piss, as it were.

          And teens were making “zip guns” in the 1950s

          • bad12 5.1.1.1.1
            28 February 2014 at 2:14 pm

            A further explanation Mac is definitely needed to show how gunpowder can be produced using a ‘printer’, i would suggest it cannot and would have to be inserted in the ‘cartridge’ with which such a printer would actually print,

            i agree with the Posts author on the fact that plastic is not of sufficient strength be able to escape the explosive forces of discharge and remain intact,

            Yeah sure, i was making bolt-bombs out of match-heads and steel razors in my Borstal years, tossed out the cells air-vent in a two storey cell block they were quite an effective tool for intimidating the night patrol screws with the various bits of steel zinging off the confined space a number of times even with such small explosive force…

            • McFlock 5.1.1.1.1.1
              28 February 2014 at 2:18 pm

              You might as well ask how cooked pancakes can be produced using a ‘printer’.

              why use a printer? I made it as a kid at home. Two of the ingredients are easily obtainable, another is moderately-easily obtainable. The trick is in the ratios and mixing process, easily available online and used 700 years ago.

              Easy to make it go boom.

              • KJT …
                28 February 2014 at 2:32 pm

                I think our collective point is there is much easier, simpler and better known ways of making effective weapons than using 3D printers.

                And, even if they were effective, despite the knowledge, equipment and skills being common out there, very few people do make weapons. Apart from hobbyists, like black powder clubbers, who have no intention of using them illegally.

              • Draco T Bastard …
                28 February 2014 at 4:15 pm

                why use a printer?

                Caseless ammunition

            • greywarbler 5.1.1.1.1.2
              28 February 2014 at 3:02 pm

              bad12
              Sounds like fun, diversion and revenge in a package.

          • KJT 5.1.1.1.2
            28 February 2014 at 2:22 pm

            And first year University engineering gives enough knowledge to make “composite” (plastic) guns.

            I will stop on this subject before the GCSB get interested.

        • Draco T Bastard 5.1.1.2
          28 February 2014 at 4:08 pm

          Airgun

          In the 17th century, air guns, in calibers .30–.51, were used to hunt big game deer and wild boar. These air rifles were charged using a pump to fill an air reservoir and gave velocities from 650 to 1,000 feet per second (200–300 m/s). They were also used in warfare; the most recognized example being the Girandoni Military Repeating Air Rifle.

          I have NFI why some people think that airguns aren’t dangerous.

  6. captain hook 6
    28 February 2014 at 12:59 pm

    this is all hypothetical mush designed to sell newspapers and distract voters from the real issues.
    Where are the jobs and why is the National Party intent on wrecking the education system.
    all the rest is piffle.

  7. Rich 7
    28 February 2014 at 1:18 pm

    there is a much simpler route to control of ecstasy in NZ

    Legalise it and sell it in Cosmic?

    I can’t believe how Kathryn Ryan didn’t pick Williamson up on anything he said: like surely if someone says printing a gun is possible, then the obvious question is “but can you print any ammunition”. (Making and handling a primary explosive is a fairly difficult process on a non-industrial scale).

    Then there was the “I read this in a magazine” and the “making gold”.

    • freedom 7.1
      28 February 2014 at 1:35 pm

      “I can’t believe how Kathryn Ryan didn’t pick Williamson up on anything he said”

      A week ago Kathryn Ryan had the PM sitting there talking about how dangerous the 10 billion dollar debt left by Labour was, and somehow forgot to ask the PM about the 60 billion dollar debt National have created ???

      *shakes head, walks away muttering *

  8. fender 8
    28 February 2014 at 1:46 pm

    Williamson has been having too much fun printing his own supply of acid trips.

    I’m more concerned about the Nats printing off caucus members without proper quality control measures in place..

  9. Tracey 9
    28 February 2014 at 2:45 pm

    makes you wonder what maurice really meant by the big gay rainbow.

  10. xtasy 10
    28 February 2014 at 10:49 pm

    Nooooo brain transplant for Nat techheads, please, they may get some “ideas” after all, no, thanks!

Recent Comments

Recent Posts

  • Government commits $20m to Westport flood protection
    The Government has announced that $20 million in funding will be made available to Westport to fund much needed flood protection around the town. This measure will significantly improve the resilience of the community, says Local Government Minister Simeon Brown. “The Westport community has already been allocated almost $3 million ...
    BeehiveBy beehive.govt.nz
    3 hours ago

  • Taupō takes pole position
    The Government is proud to support the first ever Repco Supercars Championship event in Taupō as up to 70,000 motorsport fans attend the Taupō International Motorsport Park this weekend, says Economic Development Minister Melissa Lee. “Anticipation for the ITM Taupō Super400 is huge, with tickets and accommodation selling out weeks ...
    BeehiveBy beehive.govt.nz
    4 hours ago

  • Cost of living support for low-income homeowners
    Local Government Minister Simeon Brown has announced an increase to the Rates Rebate Scheme, putting money back into the pockets of low-income homeowners.  “The coalition Government is committed to bringing down the cost of living for New Zealanders. That includes targeted support for those Kiwis who are doing things tough, such ...
    BeehiveBy beehive.govt.nz
    6 hours ago

  • Government backing mussel spat project
    The Coalition Government is investing in a project to boost survival rates of New Zealand mussels and grow the industry, Oceans and Fisheries Minister Shane Jones has announced. “This project seeks to increase the resilience of our mussels and significantly boost the sector’s productivity,” Mr Jones says. “The project - ...
    BeehiveBy beehive.govt.nz
    7 hours ago

  • Government focused on getting people into work
    Benefit figures released today underscore the importance of the Government’s plan to rebuild the economy and have 50,000 fewer people on Jobseeker Support, Social Development and Employment Minister Louise Upston says. “Benefit numbers are still significantly higher than when National was last in government, when there was about 70,000 fewer ...
    BeehiveBy beehive.govt.nz
    9 hours ago

  • Clean energy key driver to reducing emissions
    The Government’s commitment to doubling New Zealand’s renewable energy capacity is backed by new data showing that clean energy has helped the country reach its lowest annual gross emissions since 1999, Climate Change Minister Simon Watts says. New Zealand’s latest Greenhouse Gas Inventory (1990-2022) published today, shows gross emissions fell ...
    BeehiveBy beehive.govt.nz
    10 hours ago

  • Earthquake-prone buildings review brought forward
    The Government is bringing the earthquake-prone building review forward, with work to start immediately, and extending the deadline for remediations by four years, Building and Construction Minister Chris Penk says. “Our Government is focused on rebuilding the economy. A key part of our plan is to cut red tape that ...
    BeehiveBy beehive.govt.nz
    15 hours ago

  • Thailand and NZ to agree to Strategic Partnership
    Prime Minister Christopher Luxon and his Thai counterpart, Prime Minister Srettha Thavisin, have today agreed that New Zealand and the Kingdom of Thailand will upgrade the bilateral relationship to a Strategic Partnership by 2026. “New Zealand and Thailand have a lot to offer each other. We have a strong mutual desire to build ...
    BeehiveBy beehive.govt.nz
    1 day ago

  • Government consults on extending coastal permits for ports
    RMA Reform Minister Chris Bishop and Transport Minister Simeon Brown have today announced the Coalition Government’s intention to extend port coastal permits for a further 20 years, providing port operators with certainty to continue their operations. “The introduction of the Resource Management Act in 1991 required ports to obtain coastal ...
    BeehiveBy beehive.govt.nz
    1 day ago

  • Inflation coming down, but more work to do
    Today’s announcement that inflation is down to 4 per cent is encouraging news for Kiwis, but there is more work to be done - underlining the importance of the Government’s plan to get the economy back on track, acting Finance Minister Chris Bishop says. “Inflation is now at 4 per ...
    BeehiveBy beehive.govt.nz
    1 day ago

  • School attendance restored as a priority in health advice
    Refreshed health guidance released today will help parents and schools make informed decisions about whether their child needs to be in school, addressing one of the key issues affecting school attendance, says Associate Education Minister David Seymour. In recent years, consistently across all school terms, short-term illness or medical reasons ...
    BeehiveBy beehive.govt.nz
    1 day ago

  • Unnecessary bureaucracy cut in oceans sector
    Oceans and Fisheries Minister Shane Jones is streamlining high-level oceans management while maintaining a focus on supporting the sector’s role in the export-led recovery of the economy. “I am working to realise the untapped potential of our fishing and aquaculture sector. To achieve that we need to be smarter with ...
    BeehiveBy beehive.govt.nz
    1 day ago

  • Patterson promoting NZ’s wool sector at International Congress
    Associate Agriculture Minister Mark Patterson is speaking at the International Wool Textile Organisation Congress in Adelaide, promoting New Zealand wool, and outlining the coalition Government’s support for the revitalisation the sector.    "New Zealand’s wool exports reached $400 million in the year to 30 June 2023, and the coalition Government ...
    BeehiveBy beehive.govt.nz
    2 days ago

  • Removing red tape to help early learners thrive
    The Government is making legislative changes to make it easier for new early learning services to be established, and for existing services to operate, Associate Education Minister David Seymour says. The changes involve repealing the network approval provisions that apply when someone wants to establish a new early learning service, ...
    BeehiveBy beehive.govt.nz
    2 days ago

  • RMA changes to cut coal mining consent red tape
    Changes to the Resource Management Act will align consenting for coal mining to other forms of mining to reduce barriers that are holding back economic development, Resources Minister Shane Jones says. “The inconsistent treatment of coal mining compared with other extractive activities is burdensome red tape that fails to acknowledge ...
    BeehiveBy beehive.govt.nz
    2 days ago

  • McClay reaffirms strong NZ-China trade relationship
    Trade, Agriculture and Forestry Minister Todd McClay has concluded productive discussions with ministerial counterparts in Beijing today, in support of the New Zealand-China trade and economic relationship. “My meeting with Commerce Minister Wang Wentao reaffirmed the complementary nature of the bilateral trade relationship, with our Free Trade Agreement at its ...
    BeehiveBy beehive.govt.nz
    3 days ago

  • Prime Minister Luxon acknowledges legacy of Singapore Prime Minister Lee
    Prime Minister Christopher Luxon today paid tribute to Singapore’s outgoing Prime Minister Lee Hsien Loong.   Meeting in Singapore today immediately before Prime Minister Lee announced he was stepping down, Prime Minister Luxon warmly acknowledged his counterpart’s almost twenty years as leader, and the enduring legacy he has left for Singapore and South East ...
    BeehiveBy beehive.govt.nz
    3 days ago

  • PMs Luxon and Lee deepen Singapore-NZ ties
    Prime Minister Christopher Luxon held a bilateral meeting today with Singapore Prime Minister Lee Hsien Loong. While in Singapore as part of his visit to South East Asia this week, Prime Minister Luxon also met with Singapore President Tharman Shanmugaratnam and will meet with Deputy Prime Minister Lawrence Wong.  During today’s meeting, Prime Minister Luxon ...
    BeehiveBy beehive.govt.nz
    3 days ago

  • Antarctica New Zealand Board appointments
    Foreign Minister Winston Peters has made further appointments to the Board of Antarctica New Zealand as part of a continued effort to ensure the Scott Base Redevelopment project is delivered in a cost-effective and efficient manner.  The Minister has appointed Neville Harris as a new member of the Board. Mr ...
    BeehiveBy beehive.govt.nz
    3 days ago

  • Finance Minister travels to Washington DC
    Finance Minister Nicola Willis will travel to the United States on Tuesday to attend a meeting of the Five Finance Ministers group, with counterparts from Australia, the United States, Canada, and the United Kingdom.  “I am looking forward to meeting with our Five Finance partners on how we can work ...
    BeehiveBy beehive.govt.nz
    3 days ago

  • Pet bonds a win/win for renters and landlords
    The coalition Government has today announced purrfect and pawsitive changes to the Residential Tenancies Act to give tenants with pets greater choice when looking for a rental property, says Housing Minister Chris Bishop. “Pets are important members of many Kiwi families. It’s estimated that around 64 per cent of New ...
    BeehiveBy beehive.govt.nz
    3 days ago

  • Long Tunnel for SH1 Wellington being considered
    State Highway 1 (SH1) through Wellington City is heavily congested at peak times and while planning continues on the duplicate Mt Victoria Tunnel and Basin Reserve project, the Government has also asked NZ Transport Agency (NZTA) to consider and provide advice on a Long Tunnel option, Transport Minister Simeon Brown ...
    BeehiveBy beehive.govt.nz
    4 days ago

  • New Zealand condemns Iranian strikes
    Prime Minister Christopher Luxon and Foreign Minister Winston Peters have condemned Iran’s shocking and illegal strikes against Israel.    “These attacks are a major challenge to peace and stability in a region already under enormous pressure," Mr Luxon says.    "We are deeply concerned that miscalculation on any side could ...
    BeehiveBy beehive.govt.nz
    4 days ago

  • Huge interest in Government’s infrastructure plans
    Hundreds of people in little over a week have turned out in Northland to hear Regional Development Minister Shane Jones speak about plans for boosting the regional economy through infrastructure. About 200 people from the infrastructure and associated sectors attended an event headlined by Mr Jones in Whangarei today. Last ...
    BeehiveBy beehive.govt.nz
    6 days ago

  • Health Minister thanks outgoing Health New Zealand Chair
    Health Minister Dr Shane Reti has today thanked outgoing Health New Zealand – Te Whatu Ora Chair Dame Karen Poutasi for her service on the Board.   “Dame Karen tendered her resignation as Chair and as a member of the Board today,” says Dr Reti.  “I have asked her to ...
    BeehiveBy beehive.govt.nz
    6 days ago

  • Roads of National Significance planning underway
    The NZ Transport Agency (NZTA) has signalled their proposed delivery approach for the Government’s 15 Roads of National Significance (RoNS), with the release of the State Highway Investment Proposal (SHIP) today, Transport Minister Simeon Brown says.  “Boosting economic growth and productivity is a key part of the Government’s plan to ...
    BeehiveBy beehive.govt.nz
    6 days ago

  • Navigating an unstable global environment
    New Zealand is renewing its connections with a world facing urgent challenges by pursuing an active, energetic foreign policy, Foreign Minister Winston Peters says.   “Our country faces the most unstable global environment in decades,” Mr Peters says at the conclusion of two weeks of engagements in Egypt, Europe and the United States.    “We cannot afford to sit back in splendid ...
    BeehiveBy beehive.govt.nz
    6 days ago

  • NZ welcomes Australian Governor-General
    Prime Minister Christopher Luxon has announced the Australian Governor-General, His Excellency General The Honourable David Hurley and his wife Her Excellency Mrs Linda Hurley, will make a State visit to New Zealand from Tuesday 16 April to Thursday 18 April. The visit reciprocates the State visit of former Governor-General Dame Patsy Reddy ...
    BeehiveBy beehive.govt.nz
    6 days ago

  • Pseudoephedrine back on shelves for Winter
    Associate Health Minister David Seymour has announced that Medsafe has approved 11 cold and flu medicines containing pseudoephedrine. Pharmaceutical suppliers have indicated they may be able to supply the first products in June. “This is much earlier than the original expectation of medicines being available by 2025. The Government recognised ...
    BeehiveBy beehive.govt.nz
    6 days ago

  • NZ and the US: an ever closer partnership
    New Zealand and the United States have recommitted to their strategic partnership in Washington DC today, pledging to work ever more closely together in support of shared values and interests, Foreign Minister Winston Peters says.    “The strategic environment that New Zealand and the United States face is considerably more ...
    BeehiveBy beehive.govt.nz
    7 days ago

  • Joint US and NZ declaration
    April 11, 2024 Joint Declaration by United States Secretary of State the Honorable Antony J. Blinken and New Zealand Minister of Foreign Affairs the Right Honourable Winston Peters We met today in Washington, D.C. to recommit to the historic partnership between our two countries and the principles that underpin it—rule ...
    BeehiveBy beehive.govt.nz
    7 days ago

  • NZ and US to undertake further practical Pacific cooperation
    Foreign Minister Winston Peters has announced further New Zealand cooperation with the United States in the Pacific Islands region through $16.4 million in funding for initiatives in digital connectivity and oceans and fisheries research.   “New Zealand can achieve more in the Pacific if we work together more urgently and ...
    BeehiveBy beehive.govt.nz
    7 days ago

  • Government redress for Te Korowai o Wainuiārua
    The Government is continuing the bipartisan effort to restore its relationship with iwi as the Te Korowai o Wainuiārua Claims Settlement Bill passed its first reading in Parliament today, says Treaty Negotiations Minister Paul Goldsmith. “Historical grievances of Te Korowai o Wainuiārua relate to 19th century warfare, land purchased or taken ...
    BeehiveBy beehive.govt.nz
    1 week ago

  • Focus on outstanding minerals permit applications
    New Zealand Petroleum and Minerals is working to resolve almost 150 outstanding minerals permit applications by the end of the financial year, enabling valuable mining activity and signalling to the sector that New Zealand is open for business, Resources Minister Shane Jones says.  “While there are no set timeframes for ...
    BeehiveBy beehive.govt.nz
    1 week ago

  • Applications open for NZ-Ireland Research Call
    The New Zealand and Irish governments have today announced that applications for the 2024 New Zealand-Ireland Joint Research Call on Agriculture and Climate Change are now open. This is the third research call in the three-year Joint Research Initiative pilot launched in 2022 by the Ministry for Primary Industries and Ireland’s ...
    BeehiveBy beehive.govt.nz
    1 week ago

  • Tenancy rules changes to improve rental market
    The coalition Government has today announced changes to the Residential Tenancies Act to encourage landlords back to the rental property market, says Housing Minister Chris Bishop. “The previous Government waged a war on landlords. Many landlords told us this caused them to exit the rental market altogether. It caused worse ...
    BeehiveBy beehive.govt.nz
    1 week ago

  • Boosting NZ’s trade and agricultural relationship with China
    Trade and Agriculture Minister Todd McClay will visit China next week, to strengthen relationships, support Kiwi exporters and promote New Zealand businesses on the world stage. “China is one of New Zealand’s most significant trade and economic relationships and remains an important destination for New Zealand’s products, accounting for nearly 22 per cent of our good and ...
    BeehiveBy beehive.govt.nz
    1 week ago

  • Freshwater farm plan systems to be improved
    The coalition Government intends to improve freshwater farm plans so that they are more cost-effective and practical for farmers, Associate Environment Minister Andrew Hoggard and Agriculture Minister Todd McClay have announced. “A fit-for-purpose freshwater farm plan system will enable farmers and growers to find the right solutions for their farm ...
    BeehiveBy beehive.govt.nz
    1 week ago

  • New Fast Track Projects advisory group named
    The coalition Government has today announced the expert advisory group who will provide independent recommendations to Ministers on projects to be included in the Fast Track Approvals Bill, say RMA Reform Minister Chris Bishop and Regional Development Minister Shane Jones. “Our Fast Track Approval process will make it easier and ...
    BeehiveBy beehive.govt.nz
    1 week ago

  • Pacific and Gaza focus of UN talks
    Foreign Minister Winston Peters says his official talks with the United Nations Secretary-General Antonio Guterres in New York today focused on a shared commitment to partnering with the Pacific Islands region and a common concern about the humanitarian catastrophe in Gaza.    “Small states in the Pacific rely on collective ...
    BeehiveBy beehive.govt.nz
    1 week ago

Page generated in The Standard by Wordpress at 2024-04-18T07:40:04+00:00