The 3D printer peril!

Written By: - Date published: 10:47 am, April 12th, 2013 - 108 comments
Categories: you couldn't make this shit up - Tags: , , ,

From RNZ:

3D printers a border security threat – minister

Customs Minister Maurice Williamson says he is extremely worried about what 3D printers will do to border security …

He says household printers will soon be able to produce drugs and weapons, and the country’s borders are extremely vulnerable.

“If people could print off … sheets of Ecstasy tablets at the party they’re at at that time that just completely takes away our border protection role in its known sense.”

Who can save us from this peril?

108 comments on “The 3D printer peril! ”

  • Comments are now closed

  1. TheContrarian 1
    12 April 2013 at 10:54 am

    Yeah not sure about printing ecstasy.
    It’s a printer not a teleporter you klutz

    • Colonial Viper 1.1
      12 April 2013 at 10:55 am

      Invasion of the Star Trek matter replicators….

      WTF is Williamson on about? And National Radio was going on this morning about the coming threat posed by ordinary home printers. I mean, WTF?

      • TheContrarian 1.1.1
        12 April 2013 at 10:57 am

        You would still need to raw ingredient to fill the printer with so effectively the printer would just be a pill press.

        (Though there is the threat of people printing off weapons – that is a real issue)

        • lprent 1.1.1.1
          12 April 2013 at 11:08 am

          No more so than anyone with access to the internet and a few tools. Plastic spring loaded weapons aren’t exactly hard to make (ie plastic slug guns) and nor are large magazines.

          It will be some time before the 3D printers are able to make barrels, locks, or automatic reloading mechanisms capable of handling the gas discharges on an explosive weapon.

          • chris73 1.1.1.1.1
            12 April 2013 at 11:18 am

            http://www.youtube.com/watch?v=FLlJshR6nvg

            Yes but human endeavor being what it is I think Williamson is right to be concerned (about the guns anyway)

            • One Anonymous Knucklehead 1.1.1.1.1.1
              12 April 2013 at 11:22 am

              What, you think bad people have trouble getting access to weapons in NZ?

              Don’t want people printing their own paracetamol now, do we? What would that do to profits?

            • lprent 1.1.1.1.1.2
              12 April 2013 at 12:03 pm

              There is a whole different level of problem involved in sintering metal to produce the kind of bonded strengths required.

              Of course it is quite feasible to rebuild an existing semi-automatic weapon to become fully automatic. But personally I’d just ban the import of semi-automatics because they serve no useful functional purpose apart from pleasuring people who like wasting ammo.

              • chris73 …
                12 April 2013 at 12:20 pm

                I think the gun rules we have now are working just fine, theres no need to ban something just because you don’t like them.

                I would take a look at the 3d printing seriously though.

                • Jackal …
                  12 April 2013 at 2:05 pm

                  In 2011, around 7000 prohibited and regulated weapons offenses were reported in New Zealand… Clearly further firearm law reforms are required.

                  I would take a look at the 3d printing seriously though.

                  For making weapons? That says more about your lack of knowledge concerning simple manufacturing principles than anything else chris73.

                • lprent …
                  12 April 2013 at 2:21 pm

                  Silly diversion. I guess you just didn’t want to deal with the question…

                  I do like weapons and have done so ever since I was in the army. My sole proactive reason to go to Invercargill is because Lyn’s father is a gunsmith and has some interesting ones to play with.

                  However that wasn’t what I said. What I said was there was no functional purpose in NZ for semi-automatic weapons. If there was a problem with conversions from semi-automatics to automatic with 3D printers or CNC lathes or whatever, then just remove the semi-automatics. The materials, mechanisms and tolerances on those are going to be impossible to produce with a melted sinter technique. It effectively gets rid of the weapons side of Maurice’s foolish fears.

                  Seems like a simple enough thing to me.

                  • chris73 …
                    12 April 2013 at 2:39 pm

                    “What I said was there was no functional purpose in NZ for semi-automatic weapons.”

                    – I don’t have a problem with semi-auto rifles and shot guns for hunting purposes and if someone wants to buy a machine gun and blat away on the range and waste some rounds I don’t see an issue with that either

                    – I think a bigger problem would be banning things because we don’t see a need for them *insert slippery slope reference here*

            • Rogue Trooper 1.1.1.1.1.3
              12 April 2013 at 12:26 pm

              ahhh, a “snale” trail. . . . . . . . . .

  2. BM 2
    12 April 2013 at 10:57 am

    Google 3d printing drugs

  3. One Anonymous Knucklehead 3
    12 April 2013 at 10:59 am

    This.

    “The ‘chemputer’ that could print out any drug”.

    • TheContrarian 3.1
      12 April 2013 at 11:02 am

      Yeah but you need the raw ingredients.

      • One Anonymous Knucklehead 3.1.1
        12 April 2013 at 11:07 am

        Sure, they just sell the machine, not the print cartridges.

        Oh, and by the way, Wikipedia informs me that Ecstasy, for example, is made of carbon, hydrogen, nitrogen and oxygen.

        • TheContrarian 3.1.1.1
          12 April 2013 at 11:11 am

          As well as Safrole
          http://en.wikipedia.org/wiki/Safrole

          • One Anonymous Knucklehead 3.1.1.1.1
            12 April 2013 at 11:30 am

            You use “reactionware” to make it. Google it.

            • TheContrarian 3.1.1.1.1.1
              12 April 2013 at 11:37 am

              So all you are doing is replacing one method of doing chemistry for another.
              It still isn’t the equivalent of printing sheets of ecstasy at a party

              • One Anonymous Knucklehead …
                12 April 2013 at 11:46 am

                The major concern is for the profits from legal pharmaceuticals once anyone who knows what the molecule looks like can make it locally.

                Has the penny started to drop?

                The current manufacturers are looking at a new distribution paradigm with horror.

                • Jackal …
                  12 April 2013 at 2:18 pm

                  You can’t manufacture the “molecules” required to produce ecstasy (or any other drug for that matter) out of thin air One Anonymous Knucklehead… You still need the raw ingredients, which cannot be downloaded off the internet. Such a fantasy is quite simply ridiculous! Why would you use a 3D printer when a pill press is cheaper and faster anyway?

                  • Draco T Bastard …
                    12 April 2013 at 2:36 pm

                    You still need the raw ingredients, which cannot be downloaded off the internet.

                    No they can’t – but they can be purchased at the dairy.

                    Why would you use a 3D printer when a pill press is cheaper and faster anyway?

                    For now.

                    • TheContrarian …
                      12 April 2013 at 2:48 pm

                      ” but they can be purchased at the dairy”

                      You can’t purchase Ecstasy catalysts and percusors at the dairy Draco

                    • One Anonymous Knucklehead …
                      12 April 2013 at 2:55 pm

                      TC, what about Soliris? Or herceptin?

                    • TheContrarian …
                      12 April 2013 at 3:20 pm

                      You going to make herceptin from ingredients at the dairy? Good luck with that

                    • One Anonymous Knucklehead …
                      12 April 2013 at 3:25 pm

                      Carbon, nitrogen, hydrogen, oxygen and sulphur.

                    • TheContrarian …
                      12 April 2013 at 3:51 pm

                      You do know you can’t actually buy hydrogen from the dairy?

                      Secondly are you really suggesting that it is as easy as just combing those elements? Really?

                    • Draco T Bastard …
                      12 April 2013 at 3:55 pm

                      You can’t purchase Ecstasy catalysts and percusors at the dairy Draco

                      And what happens when the 3D printer becomes the catalyst?

                      It’s coming. There was an article a few years ago (haven’t been able to find it since which is really irritating) about a Canterbury University team that had managed to perfect the manipulation of atoms by lasers. The next step, I believe, would be to give the atom the necessary energy state that it will form a molecule with another atom or series of atoms.

                      Time consuming? Sure, but when there’s millions or billions of these types of printers around who really cares?

                      And I’m sure that the time constraint will be addressed at some point to.

                    • TheContrarian …
                      12 April 2013 at 4:00 pm

                      The key ingredient of ecstasy is a controlled substance which you’d need first

                    • One Anonymous Knucklehead …
                      12 April 2013 at 5:08 pm

                      TC: yeah, I know it’s not that easy, but I doubt 3D printing is “that easy” either and yet there’s one right there.

                      And let’s face it, this is only version 2.0 or something.

                    • Jackal …
                      12 April 2013 at 7:47 pm

                      Now correct me if I’m wrong, but the catalyst or active ingredient in ecstasy is usually 3,4-methylenedioxymethamphetamine also known as piperonyl acetone, which as TC has noted is derived from Safrole, an organic compound. Also known as MDMA base, it’s a colourless oil insoluble in water.

                      Originally safrole was mixed with hydrobromic acid to form bromosafrole, which was converted to MDMA using methylamine, which is also an organic compound.

                      As far as I can tell, this is a reactive animation process, meaning that simply mixing these separate components together in a printing mechanism using printing cartridges wouldn’t work… You would need a chemical reactive and/or heat process first.

                      Here is a common biochemical sequence in the reactive process: HO2CC(O)R → HO2CC(=NCH2-X)R → HO2CCH(N=CH-X)R → HO2CCH(NH2)R. You can’t honestly be trying to tell me that a 3D “printer” can or will be able to do that?

                      Also, Safrole is derived from plants, meaning that without plants providing the complex active ingredient, synthesis of effective illicit drugs is unlikely to occur. The same can be said for cocaine, heroin and pretty much any illicit drug you can mention.

                      Some prescription and illicit drugs are entirely synthetic, but I would presume that adding the expense and difficulty of mixing various components in order to print them would make the process entirely prohibitive. It certainly won’t be the issue that Williamson and his defenders seem to envision.

                  • One Anonymous Knucklehead …
                    12 April 2013 at 2:38 pm

                    Um yes. You have to have access to the raw materials. And the hardware, and the software “formula” and then you can make them anywhere. And it’s a new distribution paradigm, which pharmaceutical companies would doubtless like to control, to prevent someone like me, say, looking up the software for their latest creation on say, Megaupload, and making a batch without paying them a cent.

                    • TheContrarian …
                      12 April 2013 at 2:57 pm

                      You have invented a conspiracy (of sorts) before such a conspiracy is even technologically viable.

                      That must be a record of some kind

                    • One Anonymous Knucklehead …
                      12 April 2013 at 3:23 pm

                      What’s conspiratorial about an industry doing its best to protect profits?

          • Rogue Trooper 3.1.1.1.2
            12 April 2013 at 12:31 pm

            love seasonings

      • NickS 3.1.2
        12 April 2013 at 1:36 pm

        pfft.

        Feedstock is a piece of piss to get your hands on for most organic chemistry work, it’s reactants (attaching carbons to aromatic rings requires “fun”, and nitrogen groups…) and catalysts (ranging from iron oxide, to the esoteric) that’s another problem. Along with the usual low yield issues if the synthesis method hasn’t been or is very problematic to optimise.

        Although nano-scale surfaces have produced some interesting catalysts and the fluid physics of small reaction vessels and delivery tubes introduces some novel solutions (so. much. chemistry…).

        Either way more time and research be needed to make drug-bricks economical compared to current organic synthesis methods. But it’s sure as hell not a piece of pure fantasy, unlike grey-goo.

  4. lprent 4
    12 April 2013 at 11:05 am

    I heard this and spent the entire segment saying WTF!

    I couldn’t figure out who were the biggest fools, Maurice, or the gullible idiots that reported that as news.

    You could with the current technology produce plastic spring loaded weapons with a 3d printer. But anyone with access to the internet and a tool shop could produce both them and black powder weapons. Not to mention that it isn’t that hard to find out how to make bombs, poisons, and all manner of interesting weapons.

    And ecstasy? This guy used to be a science teacher right? I guess his time as a politician has just rotted his brain because I can’t conceive of a way that 3d printer can make chemicals.

    At the tag end of the segment somewhere, I finally heard what it was about when the woman from InternetNZ said that downloading copyrighted material is exactly the same as downloading a song. Just Maurice jerking off on intellectual property issues and getting prepped for more dumbass ineffective legislation

      • TheContrarian 4.1.1
        12 April 2013 at 11:23 am

        Yes but you still need the raw ingredients.

      • lprent 4.1.2
        12 April 2013 at 11:52 am

        Yeah. The tissue and prosthetics uses are well known.

        The production of agents is something that is possible (and is regardless of the type of technology) but you still have to provide the precursors and catalysts. Ask any street P or base producer. They produce quite sophisticated drugs using cookbook techniques. Hell, even producing rotgut alcohol is just cookbook (that my grandfather was pretty good at). Their main problem is and always has been on getting the precursors and equipment.

        Having a printer assemble a catalysed product is just another cookbook technique requiring precursors. You could do the same thing without the printer.

        • TheContrarian 4.1.2.1
          12 April 2013 at 11:57 am

          Exactly what lprent sez

        • One Anonymous Knucklehead 4.1.2.2
          12 April 2013 at 12:00 pm

          I don’t think the manufacture of illegal drugs is the issue here.

          I think the manufacture of legal ones is. Researchers are discussing decentralised manufacture, effectively a new distribution model. Pharmaceutical companies (not to mention the medical profession) will be concerned for their profit margins.

          • Jackal 4.1.2.2.1
            12 April 2013 at 2:39 pm

            Large manufacturers of most legal drugs can undercut any smaller manufacturer by buying the raw ingredients in bulk. Also, the quantities and makeup of those ingredients are invariably not public knowledge, meaning that any generic replication isn’t usually as good as the patented original.

            With manufacturers having exclusive rights to the drugs they produce and a number of hurdles they must pass before those drugs are allowed to be sold, decentralised manufacturing of safe and effective drugs isn’t likely to be a growth industry.

            Besides, if it was as simple as you make out One Anonymous Knucklehead, why not just buy the raw ingredients and some gelatine capsules? Why the need for a 3D printer?

            • One Anonymous Knucklehead 4.1.2.2.1.1
              12 April 2013 at 2:47 pm

              the quantities and makeup of those ingredients are invariably not public knowledge

              And with the right software, you don’t need any of that knowledge, and you could say, make your own paracetamol and pay the chemist nothing.

              Pharmaceutical companies will try and control this technology in the same way that Hollywood tries to control software piracy, and for the same reasons.

              • northshoredoc …
                12 April 2013 at 3:21 pm

                Even if you could why would you bother when PHARMAC currently buys it in for the NZ public at $9.38 per 1000 tabs ?

                • One Anonymous Knucklehead …
                  12 April 2013 at 3:28 pm

                  Because it might not be paracetamol you were after, and it might not be available through Pharmac.

                • Draco T Bastard …
                  12 April 2013 at 3:57 pm

                  Why pay $9.38 per 1000 when you can print 10,000 for the same price?

    • Draco T Bastard 4.2
      12 April 2013 at 2:47 pm

      But anyone with access to the internet and a tool shop could produce both them and black powder weapons.

      And you don’t need black-powder either. A good workshop and air guns work fine.

  5. mickysavage 5
    12 April 2013 at 11:10 am

    Wow seems to me that Williamson may have taken an Ecstasy tab before saying this, and not one of those 3D printer jobbies either …

    [posted also at dim post]

  6. gnomic 6
    12 April 2013 at 11:16 am

    What has Maurice been smoking? I think we should be told. I definitely don’t want any. Isn’t it about time this nitwit shuffled off into well-deserved obscurity? I was going to say, took his nose out of the trough, but of course we’ll be paying his bills until he bites the dust.

  7. Dv 7
    12 April 2013 at 11:23 am

    So – the 3 d printer could print food!!!!! from c h o and N
    Bugger that could stuff the economy

  8. Populuxe1 8
    12 April 2013 at 11:24 am

    I think you are willfully ignoring the asymptotic teleological evolution of any technology. It is entirely possible that, for example, it will become possible to “print” a high power assualt rifle or a machine gun, part by part, without the need for specialised tools. The actual material is somewhat irrelevant in contrast to the engineering specs. More to the point you would probably be making it froma non-ferrous material, so blammo – suddenly you are crawling with the equivalent of those ceramic Glocks that don’t get picked up by metal detectors.

    • TheContrarian 8.1
      12 April 2013 at 11:26 am

      yeah – the weapons part is right.
      Not so with complex chemicals. Ecstasy requires Safrole for example and unless you have a safrole cartridge you can’t make ecstasy

      • One Anonymous Knucklehead 8.1.1
        12 April 2013 at 11:28 am

        You think bad people have a problem getting access to safrole in NZ?

        This is about profits, not crime.

        • TheContrarian 8.1.1.1
          12 April 2013 at 11:34 am

          Ecstasy manufacture in NZ is extremely rare and nearly all of the ecstasy in NZ is smuggled in.
          If you had all the ingredients all you are doing is using the 3D printer instead of using traditional chemistry methods which take much longer.

          • One Anonymous Knucklehead 8.1.1.1.1
            12 April 2013 at 11:48 am

            …and this isn’t about illegal drugs it’s about the “right” to manufacture legal ones.

            • TheContrarian 8.1.1.1.1.1
              12 April 2013 at 11:50 am

              /facepalm

              • One Anonymous Knucklehead …
                12 April 2013 at 11:55 am

                Cronin imagines a day when researchers and perhaps even consumers could download 3-D printing instructions as easily as downloading a smartphone app, use the program to print the desired reaction chamber at home or in the lab, and be able to have a customized, fully tested and characterized chemical reaction at their fingertips within just a few minutes. Think printable pharmaceuticals or other beneficial chemicals for consumers or the military, among other things.

                And if you download the software from Megaupload.com rather than Pfizer.com?

                Has the penny started to drop yet?

                • TheContrarian …
                  12 April 2013 at 11:59 am

                  You can do that now with a chemistry set you silly person.

                  The printer just speeds up the process but you still catalysts and chemicals.

                  • One Anonymous Knucklehead …
                    12 April 2013 at 12:02 pm

                    Yes, you can do it know if you know a bit of chemistry.

                    The new process requires hardware, ingredients, and software. Where’s the $ for the guy who knows chemistry?

                    • TheContrarian …
                      12 April 2013 at 12:03 pm

                      /facepalm

                    • One Anonymous Knucklehead …
                      12 April 2013 at 5:13 pm

                      You don’t get it: the “clever chemist” does the job, and then the software gets stolen and mass manufacture goes ahead without the “clever chemist” earning a well-deserved cent.

                      Actually, the scenario is more like “open source” medicine competing with patent-based medicine.

                      You think the industry has a position on that much?

                    • northshoredoc …
                      12 April 2013 at 5:16 pm

                      This is effectively what occurs in India where IP on pharmaceuticals is at variance with most other countries but I can assure you it is very much more difficult to formulate APIs, intermediates and finished products than is suggested on this blog even with the formulation.

                    • One Anonymous Knucklehead …
                      12 April 2013 at 5:23 pm

                      Do you predict it’s going to get more difficult, or easier, with the advent of this new technology?

                    • northshoredoc …
                      12 April 2013 at 5:47 pm

                      It’ll depend on the adaptability of this technology to deal with complex chemical reactions, I think the technology is certainly very exciting in relation to surgical intervention and implants down the track.

                    • One Anonymous Knucklehead …
                      12 April 2013 at 5:55 pm

                      Adaptability? My pick is this is the tip of the proverbial iceberg.

      • Populuxe1 8.1.2
        12 April 2013 at 11:31 am

        Until the point technology gets to where some kind of nano-process synthesises it straight out of the carbon, hydrogen, nitrogen and oxygen in the air…

        • TheContrarian 8.1.2.1
          12 April 2013 at 11:35 am

          Yeah of course but that is like Williamson getting all frightened that soon we might be able to teleport drugs from one place to another using a teleporter. Sure we don’t have one yet but one day…

        • lprent 8.1.2.2
          12 April 2013 at 11:39 am

          If that happens then I suspect that keeping a planet intact would be more of an issue. If you can do that then there is nothing apart from hackable software to stop it happening to water or rocks.

        • NickS 8.1.2.3
          12 April 2013 at 1:55 pm

          We already have a means of doing that, it’s called “plants” 😛

    • NickS 8.2
      12 April 2013 at 1:50 pm

      Meh, ultimately it’s just a materials science issue, if the funding is there, some group will make the right kind of plastic feedstock that is a suitable metal replacement, but it’ll probably be more economical to make guns from metals. Knives on the other hand…

  9. Dv 9
    12 April 2013 at 11:44 am

    So why doesnt Ryall talk to Williamson

    3 d printer is a solution to hospital meals.

    • Tigger 9.1
      12 April 2013 at 12:04 pm

      This.

      In fact, these magical machines could solve a whole bunch of problems. Just had to renew my passport. Pity I didn’t have a 3D printer so I could save myself the hassle. And had to go to chemist to get some medication refilled but hey, the 3D printer can handle an inhaler, right? Also, need a new car. I’ll just spit the parts out of my 3D printer.

  10. Saccharomyces 10
    12 April 2013 at 12:11 pm

    Oh my god….. words fail me. Wasn’t Maurice Williamson minister of technology at some point?

    And besides, everyone knows that ecstasy pills don’t come in sheets, they come in little plastic bags!

  11. vto 11
    12 April 2013 at 12:21 pm

    Printed weapons?

    A war of paper-cuts sounds much better than a war of thermo-nuclear exchange. Bring it on I say.

  12. Pascal's bookie 12
    12 April 2013 at 12:49 pm

    brb, just downloading some water to print out for the front paddock

  13. DH 13
    12 April 2013 at 1:03 pm

    It must be true, only someone who can print (and ingest) their own drugs on a 3D printer could come up with anything this stupid.

    The weapons argument is a bit daft. You can already build most of the firearm with a home CNC machine and they’re cheaper than 3D printers.

  14. Plan B 14
    12 April 2013 at 1:07 pm

    Printing guns is basically already upon us. 3D printers can use titanium oxide so key gun parts gun can be made from titanium
    The plans are sort of available and the completely gun is no different from any other gun- a whole bunch of pieces that are then put together. some plastic some titanium
    I say it is almost there. The US are mad on guns, the idea that you can make your own gun is very appealing to a large number of people in the US. Once it is all on the net it will be everywhere.
    It will mean a major change in thinking
    Not sure where it will end up

  15. Descendant Of Sssmith 15
    12 April 2013 at 1:10 pm

    Of course you can also print heaps of stuff with a 3d printer, including the 90% of the printer itself.

    That was part of the original idea – buy one, first job is to print another one and sell it to get your money back.

    These have been around for quite a few years now but get better all the time. The make your own gun thing has been around a while as well.

    There must be an equilibrium point where idiots get worried about people getting away from the private sector selling them stuff.

    Getting an ouya – you can make your own case – plans are free on the net
    Make you own clothes pegs, clothes hooks, plastic sandals, cups, fruit bowls………

    You might have to inhale a few plastic fumes but what the hell.

    Banning the technology would be stupid.

    It is interesting how it is developing though.

    • DH 15.1
      12 April 2013 at 2:56 pm

      “It is interesting how it is developing though.”

      They are interesting. I was going to buy one of the Stratasys printers but fortunately I decided to do some research first & ended up giving it away until the market develops more. There’s a whole bunch of different technologies at varying prices and heaps of caveat emptor traps like cost of consumables, print quality and length of time they take to do a print.

      I want one but can’t justify the cost for the type that I want.

      • Descendant Of Sssmith 15.1.1
        12 April 2013 at 6:15 pm

        I’m in the same boat. The geek in me wants to play though and has done for a few years.

        They are getting better and more sophisticated with each new iteration and it’s cool watching the progression.

        Settled for an Ouya to play with as a compromise.

  16. billbrowne 16
    12 April 2013 at 3:06 pm

    Why print drugs? – print gold bars and cut out the middle-man

  17. joe90 17
    12 April 2013 at 3:17 pm

    3-D printed gun fires 6 shots – then falls to pieces.

    http://www.youtube.com/watch?feature=player_embedded&v=wuDCW_Rn5JI

    • Draco T Bastard 17.1
      12 April 2013 at 4:04 pm

      And how long before it shoots 12? 24? Unlimited?

      That’s the thing about new technologies – they’re not very good at the beginning but they get better over time.

  18. Murray Olsen 18
    12 April 2013 at 3:19 pm

    The fact that the average IQ is 100 and half the population are under this sometimes scares me when I think about it. This brain fart by Williamson places him squarely in about the bottom 10%. I’m not even going to insult the intelligence of anyone here by commenting on why what Williamson says is stupid beyond belief. The RWNJs can just believe what he says anyway, on the basis that he’s a Tory minister and therefore godlike.

  19. vto 19
    12 April 2013 at 3:59 pm

    Are these like those machines where you place some grass and water in and the molecules and atoms get rearranged to make milk?

    Wouldn’t that be grand. Bye bye moo cows.

    Don’t even need to go to the dairy for those ingredients, just step out into the back lawn.

  20. Arto 20
    12 April 2013 at 4:00 pm

    Nah, I don’t think that 3D printers will be able to fashion gun barrels anytime soon!

  21. NickS 21
    12 April 2013 at 4:59 pm

    Who can save us from this peril?

    Stupid-Legislation-Twit can!

    Watch as they submit utterly braindead legislation with financial and brain support from copy-right lobbyists, which shall flounder on the reefs of teh law and generally be either utterly ineffectual and/or draconian.

    Watch as they hinge a good degree of their political career to it, only to quickly change tack when the shit hits the fan and flip-flop like crazy!

    And more seriously – the main threat from 3d printers is pirate printing of copyrighted/patented replacement parts + open source or small-fee licensing plans that could replace a lot of smaller household items. Need more pegs? Print ’em! Need some more plates? Print em! Need a replacement plastic buckle? Print it! Missing a bit of lego? Print it!. The list pretty much overs any non-clear plastic item that can fit within a current printer.

    For a insight into the potential impacts – Cory Doctorow book “Makers” or “Rule 34” by Charles Stross.

    • Descendant Of Sssmith 21.1
      12 April 2013 at 6:20 pm

      A few people have already duped Lego bricks just cause they can – not that it was cost effective.

      Prototype testing seems to be one of the places where there is already a cost effective use for these printers though. The easy ability to move from 3d image to testing to modification to test again without leaving the building is working well for quite a few people.

  22. the pigman 22
    12 April 2013 at 11:48 pm

    Well, this is going to put Walter White out of a job…

  23. kiwi_prometheus 23
    13 April 2013 at 2:02 pm

    “If people could print off … sheets of Ecstasy tablets at the party they’re at at that time”

    Cool, dependable high quality E, it might clear out the current bloated commercial electronic dance music and revive the double speed break beats and screeching cartoon voice loops of the early 1990s underground rave scene: “I’LL TAKE YOUR BRAIN TO ANOTHER DIMENSION!!!”

  24. millsy 24
    13 April 2013 at 7:42 pm

    You are all missing a very important point (like Williamson).

    You cannot just simply go down to Dick Smiths or Harvey Norman and buy a 3D printer. They are a quite expensive. Just did a google now, and a basic one would cost just under $1000. Not including consumables.

    The idea of some homey printing himself off guns for himself and his mates is actually quite laughable.

    • kiwi_prometheus 24.1
      13 April 2013 at 10:51 pm

      What’s $1000 when you can print off unlimited Es, A grade Colombian cocaine and weaponry to have a better armed gang than the state forces?

    • Populuxe1 24.2
      14 April 2013 at 1:57 pm

      So? $1000 isn’t exactly that hard to get – it’s the exact amount of the annual study costs payment on a New Zealand student loan, and would be fairly easy to get from a loan shark. Then you print off the parts needed to upgrade the printer, or even print a whole new top of the range one – perhaps not quite yet, but most of you seem to be stuck in a very 20th century paradigm of technological progression.

Recent Comments

Recent Posts

  • Patterson promoting NZ’s wool sector at International Congress
    Associate Agriculture Minister Mark Patterson is speaking at the International Wool Textile Organisation Congress in Adelaide, promoting New Zealand wool, and outlining the coalition Government’s support for the revitalisation the sector.    "New Zealand’s wool exports reached $400 million in the year to 30 June 2023, and the coalition Government ...
    BeehiveBy beehive.govt.nz
    10 hours ago

  • Removing red tape to help early learners thrive
    The Government is making legislative changes to make it easier for new early learning services to be established, and for existing services to operate, Associate Education Minister David Seymour says. The changes involve repealing the network approval provisions that apply when someone wants to establish a new early learning service, ...
    BeehiveBy beehive.govt.nz
    13 hours ago

  • McClay reaffirms strong NZ-China trade relationship
    Trade, Agriculture and Forestry Minister Todd McClay has concluded productive discussions with ministerial counterparts in Beijing today, in support of the New Zealand-China trade and economic relationship. “My meeting with Commerce Minister Wang Wentao reaffirmed the complementary nature of the bilateral trade relationship, with our Free Trade Agreement at its ...
    BeehiveBy beehive.govt.nz
    19 hours ago

  • Prime Minister Luxon acknowledges legacy of Singapore Prime Minister Lee
    Prime Minister Christopher Luxon today paid tribute to Singapore’s outgoing Prime Minister Lee Hsien Loong.   Meeting in Singapore today immediately before Prime Minister Lee announced he was stepping down, Prime Minister Luxon warmly acknowledged his counterpart’s almost twenty years as leader, and the enduring legacy he has left for Singapore and South East ...
    BeehiveBy beehive.govt.nz
    1 day ago

  • PMs Luxon and Lee deepen Singapore-NZ ties
    Prime Minister Christopher Luxon held a bilateral meeting today with Singapore Prime Minister Lee Hsien Loong. While in Singapore as part of his visit to South East Asia this week, Prime Minister Luxon also met with Singapore President Tharman Shanmugaratnam and will meet with Deputy Prime Minister Lawrence Wong.  During today’s meeting, Prime Minister Luxon ...
    BeehiveBy beehive.govt.nz
    1 day ago

  • Antarctica New Zealand Board appointments
    Foreign Minister Winston Peters has made further appointments to the Board of Antarctica New Zealand as part of a continued effort to ensure the Scott Base Redevelopment project is delivered in a cost-effective and efficient manner.  The Minister has appointed Neville Harris as a new member of the Board. Mr ...
    BeehiveBy beehive.govt.nz
    1 day ago

  • Finance Minister travels to Washington DC
    Finance Minister Nicola Willis will travel to the United States on Tuesday to attend a meeting of the Five Finance Ministers group, with counterparts from Australia, the United States, Canada, and the United Kingdom.  “I am looking forward to meeting with our Five Finance partners on how we can work ...
    BeehiveBy beehive.govt.nz
    1 day ago

  • Pet bonds a win/win for renters and landlords
    The coalition Government has today announced purrfect and pawsitive changes to the Residential Tenancies Act to give tenants with pets greater choice when looking for a rental property, says Housing Minister Chris Bishop. “Pets are important members of many Kiwi families. It’s estimated that around 64 per cent of New ...
    BeehiveBy beehive.govt.nz
    1 day ago

  • Long Tunnel for SH1 Wellington being considered
    State Highway 1 (SH1) through Wellington City is heavily congested at peak times and while planning continues on the duplicate Mt Victoria Tunnel and Basin Reserve project, the Government has also asked NZ Transport Agency (NZTA) to consider and provide advice on a Long Tunnel option, Transport Minister Simeon Brown ...
    BeehiveBy beehive.govt.nz
    2 days ago

  • New Zealand condemns Iranian strikes
    Prime Minister Christopher Luxon and Foreign Minister Winston Peters have condemned Iran’s shocking and illegal strikes against Israel.    “These attacks are a major challenge to peace and stability in a region already under enormous pressure," Mr Luxon says.    "We are deeply concerned that miscalculation on any side could ...
    BeehiveBy beehive.govt.nz
    2 days ago

  • Huge interest in Government’s infrastructure plans
    Hundreds of people in little over a week have turned out in Northland to hear Regional Development Minister Shane Jones speak about plans for boosting the regional economy through infrastructure. About 200 people from the infrastructure and associated sectors attended an event headlined by Mr Jones in Whangarei today. Last ...
    BeehiveBy beehive.govt.nz
    4 days ago

  • Health Minister thanks outgoing Health New Zealand Chair
    Health Minister Dr Shane Reti has today thanked outgoing Health New Zealand – Te Whatu Ora Chair Dame Karen Poutasi for her service on the Board.   “Dame Karen tendered her resignation as Chair and as a member of the Board today,” says Dr Reti.  “I have asked her to ...
    BeehiveBy beehive.govt.nz
    4 days ago

  • Roads of National Significance planning underway
    The NZ Transport Agency (NZTA) has signalled their proposed delivery approach for the Government’s 15 Roads of National Significance (RoNS), with the release of the State Highway Investment Proposal (SHIP) today, Transport Minister Simeon Brown says.  “Boosting economic growth and productivity is a key part of the Government’s plan to ...
    BeehiveBy beehive.govt.nz
    4 days ago

  • Navigating an unstable global environment
    New Zealand is renewing its connections with a world facing urgent challenges by pursuing an active, energetic foreign policy, Foreign Minister Winston Peters says.   “Our country faces the most unstable global environment in decades,” Mr Peters says at the conclusion of two weeks of engagements in Egypt, Europe and the United States.    “We cannot afford to sit back in splendid ...
    BeehiveBy beehive.govt.nz
    4 days ago

  • NZ welcomes Australian Governor-General
    Prime Minister Christopher Luxon has announced the Australian Governor-General, His Excellency General The Honourable David Hurley and his wife Her Excellency Mrs Linda Hurley, will make a State visit to New Zealand from Tuesday 16 April to Thursday 18 April. The visit reciprocates the State visit of former Governor-General Dame Patsy Reddy ...
    BeehiveBy beehive.govt.nz
    4 days ago

  • Pseudoephedrine back on shelves for Winter
    Associate Health Minister David Seymour has announced that Medsafe has approved 11 cold and flu medicines containing pseudoephedrine. Pharmaceutical suppliers have indicated they may be able to supply the first products in June. “This is much earlier than the original expectation of medicines being available by 2025. The Government recognised ...
    BeehiveBy beehive.govt.nz
    4 days ago

  • NZ and the US: an ever closer partnership
    New Zealand and the United States have recommitted to their strategic partnership in Washington DC today, pledging to work ever more closely together in support of shared values and interests, Foreign Minister Winston Peters says.    “The strategic environment that New Zealand and the United States face is considerably more ...
    BeehiveBy beehive.govt.nz
    5 days ago

  • Joint US and NZ declaration
    April 11, 2024 Joint Declaration by United States Secretary of State the Honorable Antony J. Blinken and New Zealand Minister of Foreign Affairs the Right Honourable Winston Peters We met today in Washington, D.C. to recommit to the historic partnership between our two countries and the principles that underpin it—rule ...
    BeehiveBy beehive.govt.nz
    5 days ago

  • NZ and US to undertake further practical Pacific cooperation
    Foreign Minister Winston Peters has announced further New Zealand cooperation with the United States in the Pacific Islands region through $16.4 million in funding for initiatives in digital connectivity and oceans and fisheries research.   “New Zealand can achieve more in the Pacific if we work together more urgently and ...
    BeehiveBy beehive.govt.nz
    5 days ago

  • Government redress for Te Korowai o Wainuiārua
    The Government is continuing the bipartisan effort to restore its relationship with iwi as the Te Korowai o Wainuiārua Claims Settlement Bill passed its first reading in Parliament today, says Treaty Negotiations Minister Paul Goldsmith. “Historical grievances of Te Korowai o Wainuiārua relate to 19th century warfare, land purchased or taken ...
    BeehiveBy beehive.govt.nz
    5 days ago

  • Focus on outstanding minerals permit applications
    New Zealand Petroleum and Minerals is working to resolve almost 150 outstanding minerals permit applications by the end of the financial year, enabling valuable mining activity and signalling to the sector that New Zealand is open for business, Resources Minister Shane Jones says.  “While there are no set timeframes for ...
    BeehiveBy beehive.govt.nz
    5 days ago

  • Applications open for NZ-Ireland Research Call
    The New Zealand and Irish governments have today announced that applications for the 2024 New Zealand-Ireland Joint Research Call on Agriculture and Climate Change are now open. This is the third research call in the three-year Joint Research Initiative pilot launched in 2022 by the Ministry for Primary Industries and Ireland’s ...
    BeehiveBy beehive.govt.nz
    5 days ago

  • Tenancy rules changes to improve rental market
    The coalition Government has today announced changes to the Residential Tenancies Act to encourage landlords back to the rental property market, says Housing Minister Chris Bishop. “The previous Government waged a war on landlords. Many landlords told us this caused them to exit the rental market altogether. It caused worse ...
    BeehiveBy beehive.govt.nz
    5 days ago

  • Boosting NZ’s trade and agricultural relationship with China
    Trade and Agriculture Minister Todd McClay will visit China next week, to strengthen relationships, support Kiwi exporters and promote New Zealand businesses on the world stage. “China is one of New Zealand’s most significant trade and economic relationships and remains an important destination for New Zealand’s products, accounting for nearly 22 per cent of our good and ...
    BeehiveBy beehive.govt.nz
    5 days ago

  • Freshwater farm plan systems to be improved
    The coalition Government intends to improve freshwater farm plans so that they are more cost-effective and practical for farmers, Associate Environment Minister Andrew Hoggard and Agriculture Minister Todd McClay have announced. “A fit-for-purpose freshwater farm plan system will enable farmers and growers to find the right solutions for their farm ...
    BeehiveBy beehive.govt.nz
    6 days ago

  • New Fast Track Projects advisory group named
    The coalition Government has today announced the expert advisory group who will provide independent recommendations to Ministers on projects to be included in the Fast Track Approvals Bill, say RMA Reform Minister Chris Bishop and Regional Development Minister Shane Jones. “Our Fast Track Approval process will make it easier and ...
    BeehiveBy beehive.govt.nz
    7 days ago

  • Pacific and Gaza focus of UN talks
    Foreign Minister Winston Peters says his official talks with the United Nations Secretary-General Antonio Guterres in New York today focused on a shared commitment to partnering with the Pacific Islands region and a common concern about the humanitarian catastrophe in Gaza.    “Small states in the Pacific rely on collective ...
    BeehiveBy beehive.govt.nz
    7 days ago

  • Government honours Taranaki Maunga deal
    The Government is honouring commitments made to Taranaki iwi with the Te Pire Whakatupua mō Te Kāhui Tupua/Taranaki Maunga Collective Redress Bill passing its first reading Parliament today, Treaty Negotiations Minister Paul Goldsmith says. “This Bill addresses the commitment the Crown made to the eight iwi of Taranaki to negotiate ...
    BeehiveBy beehive.govt.nz
    1 week ago

  • Enhanced partnership to reduce agricultural emissions
    The Government and four further companies are together committing an additional $18 million towards AgriZeroNZ to boost New Zealand’s efforts to reduce agricultural emissions. Agriculture Minister Todd McClay says the strength of the New Zealand economy relies on us getting effective and affordable emission reduction solutions for New Zealand. “The ...
    BeehiveBy beehive.govt.nz
    1 week ago

  • 110km/h limit proposed for Kāpiti Expressway
    Transport Minister Simeon Brown has welcomed news the NZ Transport Agency (NZTA) will begin consultation this month on raising speed limits for the Kāpiti Expressway to 110km/h. “Boosting economic growth and productivity is a key part of the Government’s plan to rebuild the economy and this proposal supports that outcome ...
    BeehiveBy beehive.govt.nz
    1 week ago

  • New Zealand Biosecurity Awards – Winners announced
    Two New Zealanders who’ve used their unique skills to help fight the exotic caulerpa seaweed are this year’s Biosecurity Awards Supreme Winners, says Biosecurity Minister Andrew Hoggard. “Strong biosecurity is vital and underpins the whole New Zealand economy and our native flora and fauna. These awards celebrate all those in ...
    BeehiveBy beehive.govt.nz
    1 week ago

  • Attendance action plan to lift student attendance rates
    The Government is taking action to address the truancy crisis and raise attendance by delivering the attendance action plan, Associate Education Minister David Seymour announced today.   New Zealand attendance rates are low by national and international standards. Regular attendance, defined as being in school over 90 per cent of the ...
    BeehiveBy beehive.govt.nz
    1 week ago

  • World must act to halt Gaza catastrophe – Peters
    Foreign Minister Winston Peters has told the United Nations General Assembly (UNGA) in New York today that an immediate ceasefire is needed in Gaza to halt the ongoing humanitarian catastrophe.    “Palestinian civilians continue to bear the brunt of Israel’s military actions,” Mr Peters said in his speech to a ...
    BeehiveBy beehive.govt.nz
    1 week ago

  • Speech to United Nations General Assembly: 66th plenary meeting, 78th session
    Mr President,   The situation in Gaza is an utter catastrophe.   New Zealand condemns Hamas for its heinous terrorist attacks on 7 October and since, including its barbaric violations of women and children. All of us here must demand that Hamas release all remaining hostages immediately.   At the ...
    BeehiveBy beehive.govt.nz
    1 week ago

  • Government woolshed roadshow kicks off
    Today the Government Agriculture Ministers started their national woolshed roadshow, kicking off in the Wairarapa. Agriculture Minister Todd McClay said it has been a tough time for farmers over the past few years. The sector has faced high domestic inflation rates, high interest rates, adverse weather events, and increasing farm ...
    BeehiveBy beehive.govt.nz
    1 week ago

  • PM heads to Singapore, Thailand, and Philippines
    Prime Minister Christopher Luxon will travel to Singapore, Thailand and the Philippines this week (April 14-20), along with a senior business delegation, signalling the Government’s commitment to deepen New Zealand’s international engagement, especially our relationships in South East Asia. “South East Asia is a region that is more crucial than ever to ...
    BeehiveBy beehive.govt.nz
    1 week ago

  • Prime Minister launches Government Targets
    Prime Minister Christopher Luxon has announced further steps to get New Zealand back on track, launching nine ambitious Government Targets to help improve the lives of New Zealanders. “Our Government has a plan that is focused on three key promises we made to New Zealanders – to rebuild the economy, ...
    BeehiveBy beehive.govt.nz
    1 week ago

  • Natural hydrogen resource should be free of Treaty claims entanglement
    Natural hydrogen could be a game-changing new source of energy for New Zealand but it is essential it is treated as a critical development that benefits all New Zealanders, Resources Minister Shane Jones says. Mr Jones is seeking to give regulatory certainty for those keen to develop natural, or geological, ...
    BeehiveBy beehive.govt.nz
    1 week ago

  • Government responds to unsustainable net migration
    ...
    BeehiveBy beehive.govt.nz
    1 week ago

  • New Zealand on stage at global Space Symposium
    Space Minister Judith Collins will speak at the Space Symposium in the United States next week, promoting New Zealand’s rapidly growing place in the sector as we work to rebuild the economy. “As one of the largest global space events, attended by more than 10,000 business and government representatives from ...
    BeehiveBy beehive.govt.nz
    1 week ago

Page generated in The Standard by Wordpress at 2024-04-16T09:43:34+00:00