Nat techhead needs 3D brain transplant

Written By: - Date published: 8:16 am, February 28th, 2014 - 55 comments
Categories: crime, drugs - Tags: , , , ,

What can one say about Maurice Williamson. Is he really as much of a comedian as he appears. Well he pretty much had me in stitches of laughter yesterday morning heading to work.

I mean that it is good that he is looking at the downstream consequences before they arrive. But the examples he was using!

Mr Williamson says the printers are actually manufacturers of products and 3D computer files can be emailed or downloaded from the internet.

He says household printers will soon be able to produce drugs and weapons, and the country’s borders are extremely vulnerable.

“If people could print off … sheets of Ecstasy tablets at the party they’re at at that time, that just completely takes away our border protection role in its known sense.”

His contention is that with the development of 3d printers being so rapid, it isn’t going to be long before they become as ubiquitous as inkjets or laserjets in the hands of potential criminals (aka youth) who will be able to download sophisticated programs to attack him disrupt society. This shows a rather optimistic (ie fantastic) view of the capabilities of the devices, both current and into the foreseeable future. It also ignores that we already have equivalent technologies.

Weapons? The hardest part of any gun to make is  the barrel. This has to withstand the pressure of an explosion inside it for any chemically powered weapon. A gas powered weapon like a air gun is much the same albeit at lower pressures. If you get it wrong then you have a wee bomb in your hand. Sure in theory, a barrel could be made out of sintered metal powders. However the resulting barrel would scare the crap out of even a weapons freak like I have been over the years. Basically you’d want to fire it from remote control, even after it’d be tested many times.

And has Maurice Williamson looked at the costs of second hand CNC milling machines? They aren’t that expensive and they’re ideal for making gun barrels. They’ve been widespread in industrial and engineering plants since I was a kid and the name means “Computer Numerical Control“. In other words these days you typically download, modify, and install a program. Given some decent steel, you’d be able to roll out some pretty decent, cheap, and safe weapons just like a gunsmith I know.

Incidentally guns made out of plastic, wood, pipes, bamboo and many other materials has been around for a very long time. They have never been that popular because they are viewed by everyone who know weapons as being one-shots, and preferably fired from some distance away from our delicate bodies. Just like the glow of the Liberator 3D plastic gun, they are a interesting idea but bloody impractical for any purpose apart from posing.

liberator plastic gun

Or his example about drugs. Perhaps he should look at the do it yourself history of homebake in NZ.

Homebake can be manufactured from over-the-counter and prescription painkillers containing codeine, and was popular in the late 1970s to 1980s due to the crackdown on the heroin supply in this time period. It Is also commonly manufactured from morphine sulfate tablets as the morphine to diacetylmorphine reaction is much more simple than the codeine to morphine process. Clandestine drug laboratories established to homebake heroin have existed in New Zealand since the 1980s

This was eventually dealt with was with careful control of the active ingredients. Now if you look at the chemistry of MDMA, the active part of the drug Ecstasy:

Safrole, a colorless or slightly yellow oily liquid, extracted from the root-bark or the fruit of the sassafras tree is the primary precursor for all manufacture of MDMA.  There are numerous synthetic methods available in the literature to convert safrole into MDMA via different intermediates.

Relatively small quantities of essential oil are required to make large amounts of MDMA. The essential oil of Ocotea cymbarum typically contains between 80 and 94% safrole. This would allow 500 ml of the oil, which retails at between $20 and $100, to be used to produce between 150 and 340 grams of MDMA.

This does suggest to me that there is a much simpler route to control of ecstasy in NZ – the homebake style of control of the precursors. Typically most precursors require a pretty horrendous chemical transformation to be useful. MDMA for instance:-

800px-MDMA_Synthesis_1.svg

500px-MDMA_Synthese_2.svg

For those who didn’t have to suffer through university level organic chemistry (not my favourite subject), there are some pretty serious chemicals used in that synthesis. Each of which can be disrupted in the supply chain.

In theory of course a sufficiently advanced “printing” technology could assemble molecules from elemental atoms. But the probability of anything being capable of actually doing that at a reasonable cost within the next few generations is complete fantasy (probably drug induced).

Most drugs are the same. The active ingredients are usually derived from the natural world which is a lot further on than humans in how to assemble complex chemicals relatively cheaply and at low temperatures and pressures.  Having a drug in a refined form and merely printing it onto a substrate implies that the drug has already been manufactured or imported. Customs and other law enforcement should probably concentrate on those happening.

For that matter, in some ways it is harder to produce good ammunition than it is to produce guns. Perhaps customs and the police should look at how to improve border control on those.

The same thing applies for producing stem cell or cloned cell tissues, one of the more interesting technologies being explored with 3d printers. While it is tempting to consider creating some extra brain tissues to replace those already lost by decayed brain of Maurice Williamson. That too appears to be a long way away.

If you know where you are looking on the net and in the printed literature, you can find just about everything you need to do most things that are known technology already. You could even when I was a kid in the 60s using the Auckland War Memorial museum library to find out all of the interesting techniques used in guerilla warfare in World War 2.

But the really scary thing about this proposal is what Gareth Hughes said on frogblog:

The amazing thing is, Toby Manhire is probably right, it is terrifying he is one of the most qualified people in National to comment on tech issues.

Sure Labour politicians are, in my experience, an interesting mix of being either pretty damn technophobic or having an inept over-enthusiasm for it. But I get the impression that they’ve done some study and thinking on most tech areas I raise with them. However it’d be pretty clear to everyone who has followed 3D printing over the last decade that Maurice Williamson, National’s version of a techhead, appears to be clueless on it.

55 comments on “Nat techhead needs 3D brain transplant ”

  • Comments are now closed

  1. One Anonymous Bloke 1
    28 February 2014 at 8:44 am

    You forgot the potato cannon.

    Williamson should probably take a look at people selling 3D CAD software too, in case it fell into the wrong hands.

  2. karol 2
    28 February 2014 at 8:56 am

    I see the Stuff article by Alex Fensome yesterday is taking the Maurice Williamson line: headline “Printers capable of making guns”.

    Three-dimensional printers can already make guns, and may soon allow people to create gold, gems, food or drugs in their living rooms, the Customs Service has warned.

    It suggests the law needs to be changed to control importing designs for restricted or prohibited goods in the same way as child pornography is restricted.

    A report obtained under the Official Information Act says 3D printers have already been used for criminal activity and to create weapons. In Australia, one was used to make a working “card skimmer” device, which could steal credit card details

    So, while I usually consider Lynn to know way more than me on such matters, I wondered if he had got it wrong with this post, so looked further.

    Today, Alex Fensome in the Dom Post seems to have had a change of heart, having attended to some experts on the matter: “No smoking gun with 3-D printers, experts say”

    The founder of 3-D printer supplier MindKits, Tim Carr, said criticism of the new technology was “infuriating” and 3-D-printed guns posed more of a threat to the person firing it than their target.

    There were much more simple ways to build a gun: “A lathe is more deadly . . . I wouldn’t want to fire a gun made from a 3-D printer. There are so many easier ways to make something more lethal.”

    And a Guardian article from November last year explains just how difficult it is to make a safe-to-use gun from 3 D printing:

    Solid Concepts says that the gun comprised of over 30 3D printed components in stainless steel and a nickel-chromium based superalloy is capable of hitting “a few bulleyes at over 30 yards.”

    However, Solid Concepts stressed that this kind of metal gun cannot be printed using desktop machines – only by using an industrial printer that costs “more than my college tuition”, according to Alyssa Parkinson of Solid Concepts.

    It would have saved me time if I’d just gone with Lynn’s explanation to start with. Clearly he knows way more than Williamson about it, even though Williamson claims to have read up on the matter.

    • Lanthanide 2.1
      28 February 2014 at 9:14 am

      The line about “creating” gold, gems, food or drugs is just mind-boggling.

      • One Anonymous Bloke 2.1.1
        28 February 2014 at 9:19 am

        One quark at a time, presumably.

        • Murray Olsen 2.1.1.1
          1 March 2014 at 2:32 am

          Been a while since I’ve done any particle physics, but I thought quarks couldn’t be isolated because of a detail called asymptotic freedom. Since it has “freedom” in the name, I would have expected NAct to know that.

      • karol 2.1.2
        28 February 2014 at 9:21 am

        Kind of like the ancient art of alchemy.

        • One Anonymous Bloke 2.1.2.1
          28 February 2014 at 9:32 am

          These days, transmuting elements (the alchemical grail) is routine in particle and nuclear physics.

          • lprent 2.1.2.1.1
            28 February 2014 at 1:14 pm

            Just freaking expensive because of the energy and capital requirements.

            • One Anonymous Bloke 2.1.2.1.1.1
              28 February 2014 at 1:44 pm

              Nah, it’s actually cheap, but the scientists involved are part of the Al Gore conspiracy so they funnel the money straight to a secret standing army the UN is building. Luckily we have the Masters of Cyberspace to protect us.

          • McFlock 2.1.2.1.2
            28 February 2014 at 1:31 pm

            Indeed, we can even make antimatter.

            And damned teens could use that to make 10megaton bombs to blow up their school.

            As long as they can afford the $5,200,000,000,000 a gram cost, of course. But it’s something we should be scared of right now.

        • freedom 2.1.2.2
          28 February 2014 at 9:42 am

          There really are people out there who believe 3D printers are some sort of Star Trek molecular synthesiser. (I imagine they are the same people who believe National are paying down debt) But let’s be honest here, if 3D printers had any of that potential they would more closely resemble something from the Sirius Cybernetics Corporation.

          When the ‘Drink’ button is pressed it makes an instant but highly detailed examination of the subject’s taste buds, a spectroscopic analysis of the subject’s metabolism, and then sends tiny experimental signals down the neural pathways to the taste centres of the subject’s brain to see what is likely to be well received.

          However, no-one knows quite why it does this because it then invariably delivers a cupful of liquid that is almost, but not quite, entirely unlike tea.

      • lprent 2.1.3
        28 February 2014 at 1:13 pm

        The line about “creating” gold, gems, food or drugs is just mind-boggling.

        Yep, with gold, the idea of doing some kind of nuclear fusion in a 3D printer is something that I don’t think even the extreme adherent of the technology would think was possible.

        I think they may have gotten it mixed up with the idea of the “Philosophers Stone“

        • Murray Olsen 2.1.3.1
          1 March 2014 at 2:35 am

          The new ACT leader probably thinks the philosophers stone is the currency paid between close relatives for commercial sex.

    • KJT 2.2
      28 February 2014 at 9:28 am

      My high school tech class in the 70’s was making crossbows. Not something which would be allowed now.

      The bolt could go through a small tree at close range.

      The technology, and that to make gun barrels, is available in every engineering workshop in the country.

      Don’t tell Williamson. He will probably want to ban lathes.

      Don’t need fancy 3D printing technology.

      Williamson has always had a fairly loose grasp on reality. Apparent ever since he told farmers that, “opening up the coast” would cause the shipping cartels to lower freight rates.

      • weka 2.2.1
        28 February 2014 at 10:39 am

        “The technology, and that to make gun barrels, is available in every engineering workshop in the country.”

        While I agree that Williamson is being an idiot, I don’t think this comparison fits. The technology to make a gun exists within NZ, but the people capable of using that tech are relatively small compared to the idea that anyone could press a button and print off something dangerous without having to learn any kind of skill. That’s what is scaring the likes of Williamson.

        What annoys me most about Williamson’s ignorance and paranoia is it creates a backlash that carries an implied meme that 3D printing and all new technology is always good for us.

        • lprent 2.2.1.1
          28 February 2014 at 1:35 pm

          …that carries an implied meme that 3D printing … is always good for us.

          In the case of 3D printing as in what is feasible for the next couple of decades, I suspect that it is.

          Consider that I cannot think of a case where a 3D printer could be used as a production line tool. They are simply too slow at making stuff compared to any kind of mass production technique. For instance in plastics materials (the most likely immediate usage), they’d be competing against injection moulding and plastic extrusion/blowing.

          They manufacture large and small objects in a time period that can be counted in seconds. At best for the next couple of decades it is likely that 3D printing equivalent will be measured in hours, and in the case of home equipment the sizes will be pretty small.It will also be correspondingly expensive.

          What 3D printing is damn good at (and how it is used where I work) is making bespoke one-offs. For instance if we need a new design for a electronics case we get one made for us from our CAD designs. While it costs a lot, it allows us to test a design in prototype practice (often several times) before we commit to paying the 10s of thousands of dollars to make a injection die. Before 3D printing we simply wouldn’t have done that degree of testing.

          What it does is reduce our risks, time to production, and time to market.

          The same economics applies in almost every other usage I know of for 3D printing (except possibly for the emerging field of growing biological tissues)

          • Draco T Bastard 2.2.1.1.1
            28 February 2014 at 4:00 pm

            Consider that I cannot think of a case where a 3D printer could be used as a production line tool.

            GE and Rolls Royce can. Of course, that sort of capability isn’t in the at home type of 3D printer – yet.

            At best for the next couple of decades it is likely that 3D printing equivalent will be measured in hours, and in the case of home equipment the sizes will be pretty small.

            Depending upon what’s being created hours may actually be a hell of a lot faster than present methods. As for size, well, this.

            It’s still an emergent technology but I don’t think it’s decades away.

        • KJT 2.2.1.2
          28 February 2014 at 1:48 pm

          Umm. The skills exists in just about anyone who passed 5th form metalwork.

          Not so much now as the academics have this fantasy, that technology is simply to educate designers to design for the Chinese makers.
          The fact that we need about 1 designer for every hundred makers, and the Chinese have plenty of their own, seems to have escaped them.

        • Draco T Bastard 2.2.1.3
          28 February 2014 at 3:43 pm

          but the people capable of using that tech are relatively small compared to the idea that anyone could press a button and print off something dangerous without having to learn any kind of skill. That’s what is scaring the likes of Williamson.

          Nope. What’s scaring the likes of Williamson is that mega-corporations are becoming obsolete. 3D printers will giver everyone the ability to experiment and produce products at home.

          Capitalists are absolutely terrified of competition and 3D printers represent almost unlimited competition.

          • weka 2.2.1.3.1
            28 February 2014 at 6:16 pm

            True. But I also think this is a dog whistle to people* that don’t think like that and instead would be scared of the masses being able to make a gun or drugs at home.

            *I was going to say middle NZ but I’m really sick of that expression and its vagueness.

            • Draco T Bastard 2.2.1.3.1.1
              28 February 2014 at 6:48 pm

              That’s certainly how it’s framed but as bad12 points out, there’s just not that many people who want a gun.

          • lprent 2.2.1.3.2
            28 February 2014 at 9:16 pm

            They really are awesome for prototyping.

  3. felix 3
    28 February 2014 at 9:19 am

    “Having a drug in a refined form and merely printing it onto a substrate implies that the drug has already been manufactured or imported. Customs and other law enforcement should probably concentrate on those happening.”

    Actually I can think of far more important things they should be concentrating on. Why should ecstasy be any concern to them?

    • lprent 3.1
      28 February 2014 at 1:42 pm

      There is always that issue. Personally I have always been of the mind that virtually all recreational drugs should be treated like tobacco and alcohol should be. Legal, regulated strongly (including limited or no advertising), and taxed like buggery to pay for mitigating downstream harm and a good proportion of the money gathered used for explaining the downsides of use.

      Probably wouldn’t stop me from drinking, the only vice that I currently do after I had to give up my tobacco addiction after a heart attack..

      • Lloyd 3.1.1
        1 March 2014 at 12:08 am

        Recreational drugs should be like driving. Driving is potentially dangerous. So is taking drugs.

        Alcohol is a recreational drug, so any rules for other drugs would need to be applied to alcohol too.

        Drivers are tested on their knowledge and have their licence taken off them when they are shown to be too dangerous to leave on the road. Drug takers would need to pass knowledge test(s) about their drug(s) of choice and should have their licence removed when they are shown to be incapable of taking the drug of choice without harming either them selves or others around them.

        Legal drugs would be much cheaper if sold at cost by the state. (Remember state control of alcohol as a choice in elections?) Supply of drugs would need to be absolutely connected to the drug taking licence. Lose your licence and no more drugs. State provided cheap recreational drugs would take any profit in drug dealing away from gangs.

        Random health tests would be a part of the drug licence regime, show signs of serious health effects and you lose your licence. Possession of a licence for certain drugs would mean that certain jobs and probably possession of a driving licence would need to be given up.

        Money spent today on drug squads would be far better spent on health check teams, and extra funding for this could come from the licencing system and drug sales.

  4. One Anonymous Bloke 4
    28 February 2014 at 9:33 am

    It’s sad in a way. The man who gave us the big gay rainbow is clearly a buffoon of the highest order.

    • RedLogix 4.1
      28 February 2014 at 11:04 am

      Yes. It’s not hard to sound plausible when espousing a political ideology – matter how much of a zombie it is.

      Reality is however their undoing.

    • Lanthanide 4.2
      28 February 2014 at 12:19 pm

      I would have thought his comments about big gay rainbows would already have made that clear.

      Sure, maybe it’s a nice soundbite and catchy, but it’s not actually clever or really all that witty.

  5. bad12 5
    28 February 2014 at 9:48 am

    Why anyone would want to indulge in even attempting to ‘print a gun’ off of some laser printer in this country is beyond me,

    If i had a mind to,and i don’t(honest,please believe me),i am pretty sure i could score a working pump action shotgun with the necessary pills to create mayhem in under 2 hours,

    An illegal AK47 would take a couple of days and assembling an arsenal too bulky to carry probably about a week,

    This place is awash with firearms so making dodgy plastic imitations would seem more an item of ‘news’ for its novelty than any actual ability to produce one off of a printer that would have any use other than as a decoration would seem a waste of time and money…

    • weka 5.1
      28 February 2014 at 10:42 am

      That misses the point bad. It’s not the few people like you, it’s the masses that will be able to buy printers.

      • bad12 5.1.1
        28 February 2014 at 12:39 pm

        The day a ‘printer’ can produce gunpowder,a necessary component of a bullet, unless all these masses of printed firearms are to be gas operated, i won’t eat my hat coz i have better uses for it,but, i will be sufficiently contrite,

        The Masses, weka, in case you havn’t noticed need only apply for a firearms license and sit a simple test to enable them access to real fire-arms,

        Hell i know a few who can barely read the Queens English and they have passed the test, as the Post points out a firearm complete with all working parts might be able to be copied in plastic but try firing a bullet out of it and see what occurs…

        • McFlock 5.1.1.1
          28 February 2014 at 1:46 pm

          “gunpowder” is a piece of piss, as it were.

          And teens were making “zip guns” in the 1950s

          • bad12 5.1.1.1.1
            28 February 2014 at 2:14 pm

            A further explanation Mac is definitely needed to show how gunpowder can be produced using a ‘printer’, i would suggest it cannot and would have to be inserted in the ‘cartridge’ with which such a printer would actually print,

            i agree with the Posts author on the fact that plastic is not of sufficient strength be able to escape the explosive forces of discharge and remain intact,

            Yeah sure, i was making bolt-bombs out of match-heads and steel razors in my Borstal years, tossed out the cells air-vent in a two storey cell block they were quite an effective tool for intimidating the night patrol screws with the various bits of steel zinging off the confined space a number of times even with such small explosive force…

            • McFlock 5.1.1.1.1.1
              28 February 2014 at 2:18 pm

              You might as well ask how cooked pancakes can be produced using a ‘printer’.

              why use a printer? I made it as a kid at home. Two of the ingredients are easily obtainable, another is moderately-easily obtainable. The trick is in the ratios and mixing process, easily available online and used 700 years ago.

              Easy to make it go boom.

              • KJT …
                28 February 2014 at 2:32 pm

                I think our collective point is there is much easier, simpler and better known ways of making effective weapons than using 3D printers.

                And, even if they were effective, despite the knowledge, equipment and skills being common out there, very few people do make weapons. Apart from hobbyists, like black powder clubbers, who have no intention of using them illegally.

              • Draco T Bastard …
                28 February 2014 at 4:15 pm

                why use a printer?

                Caseless ammunition

            • greywarbler 5.1.1.1.1.2
              28 February 2014 at 3:02 pm

              bad12
              Sounds like fun, diversion and revenge in a package.

          • KJT 5.1.1.1.2
            28 February 2014 at 2:22 pm

            And first year University engineering gives enough knowledge to make “composite” (plastic) guns.

            I will stop on this subject before the GCSB get interested.

        • Draco T Bastard 5.1.1.2
          28 February 2014 at 4:08 pm

          Airgun

          In the 17th century, air guns, in calibers .30–.51, were used to hunt big game deer and wild boar. These air rifles were charged using a pump to fill an air reservoir and gave velocities from 650 to 1,000 feet per second (200–300 m/s). They were also used in warfare; the most recognized example being the Girandoni Military Repeating Air Rifle.

          I have NFI why some people think that airguns aren’t dangerous.

  6. captain hook 6
    28 February 2014 at 12:59 pm

    this is all hypothetical mush designed to sell newspapers and distract voters from the real issues.
    Where are the jobs and why is the National Party intent on wrecking the education system.
    all the rest is piffle.

  7. Rich 7
    28 February 2014 at 1:18 pm

    there is a much simpler route to control of ecstasy in NZ

    Legalise it and sell it in Cosmic?

    I can’t believe how Kathryn Ryan didn’t pick Williamson up on anything he said: like surely if someone says printing a gun is possible, then the obvious question is “but can you print any ammunition”. (Making and handling a primary explosive is a fairly difficult process on a non-industrial scale).

    Then there was the “I read this in a magazine” and the “making gold”.

    • freedom 7.1
      28 February 2014 at 1:35 pm

      “I can’t believe how Kathryn Ryan didn’t pick Williamson up on anything he said”

      A week ago Kathryn Ryan had the PM sitting there talking about how dangerous the 10 billion dollar debt left by Labour was, and somehow forgot to ask the PM about the 60 billion dollar debt National have created ???

      *shakes head, walks away muttering *

  8. fender 8
    28 February 2014 at 1:46 pm

    Williamson has been having too much fun printing his own supply of acid trips.

    I’m more concerned about the Nats printing off caucus members without proper quality control measures in place..

  9. Tracey 9
    28 February 2014 at 2:45 pm

    makes you wonder what maurice really meant by the big gay rainbow.

  10. xtasy 10
    28 February 2014 at 10:49 pm

    Nooooo brain transplant for Nat techheads, please, they may get some “ideas” after all, no, thanks!

Recent Comments

Recent Posts

  • Speech to the 2024 Infrastructure Symposium
    Introduction Good morning. It’s a great privilege to be here at the 2024 Infrastructure Symposium. I was extremely happy when the Prime Minister asked me to be his Minister for Infrastructure. It is one of the great barriers holding the New Zealand economy back from achieving its potential. Building high ...
    BeehiveBy beehive.govt.nz
    12 hours ago

  • $571 million for Defence pay and projects
    Defence Minister Judith Collins today announced the upcoming Budget will include new funding of $571 million for Defence Force pay and projects. “Our servicemen and women do New Zealand proud throughout the world and this funding will help ensure we retain their services and expertise as we navigate an increasingly ...
    BeehiveBy beehive.govt.nz
    17 hours ago

  • Climate change – mitigating the risks and costs
    New Zealand’s ability to cope with climate change will be strengthened as part of the Government’s focus to build resilience as we rebuild the economy, Climate Change Minister Simon Watts says. “An enduring and long-term approach is needed to provide New Zealanders and the economy with certainty as the climate ...
    BeehiveBy beehive.govt.nz
    17 hours ago

  • Getting new job seekers on the pathway to work
    Jobseeker beneficiaries who have work obligations must now meet with MSD within two weeks of their benefit starting to determine their next step towards finding a job, Social Development and Employment Minister Louise Upston says. “A key part of the coalition Government’s plan to have 50,000 fewer people on Jobseeker ...
    BeehiveBy beehive.govt.nz
    2 days ago

  • Accelerating Social Investment
    A new standalone Social Investment Agency will power-up the social investment approach, driving positive change for our most vulnerable New Zealanders, Social Investment Minister Nicola Willis says.  “Despite the Government currently investing more than $70 billion every year into social services, we are not seeing the outcomes we want for ...
    BeehiveBy beehive.govt.nz
    2 days ago

  • Getting Back on Track
    Check against delivery Good morning. It is a pleasure to be with you to outline the Coalition Government’s approach to our first Budget. Thank you Mark Skelly, President of the Hutt Valley Chamber of Commerce, together with  your Board and team, for hosting me.   I’d like to acknowledge His Worship ...
    BeehiveBy beehive.govt.nz
    2 days ago

  • NZ – European Union ties more critical than ever
    Your Excellency Ambassador Meredith,   Members of the Diplomatic Corps and Ambassadors from European Union Member States,   Ministerial colleagues, Members of Parliament, and other distinguished guests, Thank you everyone for joining us.   Ladies and gentlemen -    In diplomacy, we often speak of ‘close’ and ‘long-standing’ relations.   ...
    BeehiveBy beehive.govt.nz
    2 days ago

  • Therapeutic Products Act to be repealed
    The Therapeutic Products Act (TPA) will be repealed this year so that a better regime can be put in place to provide New Zealanders safe and timely access to medicines, medical devices and health products, Associate Health Minister Casey Costello announced today. “The medicines and products we are talking about ...
    BeehiveBy beehive.govt.nz
    2 days ago

  • Decisions on Wellington City Council’s District Plan
    The Minister Responsible for RMA Reform, Chris Bishop, today released his decision on twenty recommendations referred to him by the Wellington City Council relating to its Intensification Planning Instrument, after the Council rejected those recommendations of the Independent Hearings Panel and made alternative recommendations. “Wellington notified its District Plan on ...
    BeehiveBy beehive.govt.nz
    3 days ago

  • Rape Awareness Week: Government committed to action on sexual violence
    Rape Awareness Week (6-10 May) is an important opportunity to acknowledge the continued effort required by government and communities to ensure that all New Zealanders can live free from violence, say Ministers Karen Chhour and Louise Upston.  “With 1 in 3 women and 1 in 8 men experiencing sexual violence ...
    BeehiveBy beehive.govt.nz
    3 days ago

  • Smarter lunch programme feeds more, costs less
    Associate Education Minister David Seymour has today announced that the Government will be delivering a more efficient Healthy School Lunches Programme, saving taxpayers approximately $107 million a year compared to how Labour funded it, by embracing innovation and commercial expertise. “We are delivering on our commitment to treat taxpayers’ money ...
    BeehiveBy beehive.govt.nz
    3 days ago

  • Report provides insights into marine recovery
    New research on the impacts of extreme weather on coastal marine habitats in Tairāwhiti and Hawke’s Bay will help fishery managers plan for and respond to any future events, Oceans and Fisheries Minister Shane Jones says. A report released today on research by Niwa on behalf of Fisheries New Zealand ...
    BeehiveBy beehive.govt.nz
    3 days ago

  • NZ to send political delegation to the Pacific
    Deputy Prime Minister and Foreign Minister Winston Peters will lead a broad political delegation on a five-stop Pacific tour next week to strengthen New Zealand’s engagement with the region.   The delegation will visit Solomon Islands, Papua New Guinea, Vanuatu, New Caledonia, and Tuvalu.    “New Zealand has deep and ...
    BeehiveBy beehive.govt.nz
    3 days ago

  • Low gas production threatens energy security
    There has been a material decline in gas production according to figures released today by the Gas Industry Co.  Figures released by the Gas Industry Company show that there was a 12.5 per cent reduction in gas production during 2023, and a 27.8 per cent reduction in gas production in the ...
    BeehiveBy beehive.govt.nz
    3 days ago

  • Defence industry talent, commitment recognised
    Defence Minister Judith Collins tonight announced the recipients of the Minister of Defence Awards of Excellence for Industry, saying they all contribute to New Zealanders’ security and wellbeing. “Congratulations to this year’s recipients, whose innovative products and services play a critical role in the delivery of New Zealand’s defence capabilities, ...
    BeehiveBy beehive.govt.nz
    3 days ago

  • Speech to the Minister of Defence Awards of Excellence for Industry
    Welcome to you all - it is a pleasure to be here this evening.I would like to start by thanking Greg Lowe, Chair of the New Zealand Defence Industry Advisory Council, for co-hosting this reception with me. This evening is about recognising businesses from across New Zealand and overseas who in ...
    BeehiveBy beehive.govt.nz
    3 days ago

  • Speech to the Sixth Annual New Zealand Government Data Summit
    It is a pleasure to be speaking to you as the Minister for Digitising Government.  I would like to thank Akolade for the invitation to address this Summit, and to acknowledge the great effort you are making to grow New Zealand’s digital future. Today, we stand at the cusp of ...
    BeehiveBy beehive.govt.nz
    3 days ago

  • Ceasefire agreement needed now: Peters
    New Zealand is urging both Israel and Hamas to agree to an immediate ceasefire to avoid the further humanitarian catastrophe that military action in Rafah would unleash, Foreign Minister Winston Peters says.   “The immense suffering in Gaza cannot be allowed to worsen further. Both sides have a responsibility to ...
    BeehiveBy beehive.govt.nz
    4 days ago

  • Daily school attendance data now available
    A new online data dashboard released today as part of the Government’s school attendance action plan makes more timely daily attendance data available to the public and parents, says Associate Education Minister David Seymour.  The interactive dashboard will be updated once a week to show a national average of how ...
    BeehiveBy beehive.govt.nz
    4 days ago

  • Ambassador to United States appointed
    Foreign Minister Winston Peters has announced Rosemary Banks will be New Zealand’s next Ambassador to the United States of America.    “Our relationship with the United States is crucial for New Zealand in strategic, security and economic terms,” Mr Peters says.    “New Zealand and the United States have a ...
    BeehiveBy beehive.govt.nz
    4 days ago

  • New permit proposed for recreational gold mining
    The Government is considering creating a new tier of minerals permitting that will make it easier for hobby miners to prospect for gold. “New Zealand was built on gold, it’s in our DNA. Our gold deposits, particularly in regions such as Otago and the West Coast have always attracted fortune-hunters. ...
    BeehiveBy beehive.govt.nz
    4 days ago

  • NZ and the UAE launch FTA negotiations
    Minister for Trade Todd McClay today announced that New Zealand and the United Arab Emirates (UAE) will commence negotiations on a free trade agreement (FTA). Minister McClay met with his counterpart UAE Trade Minister Dr Thani bin Ahmed Al Zeyoudi in Dubai, where they announced the launch of negotiations on a ...
    BeehiveBy beehive.govt.nz
    4 days ago

  • New Zealand Sign Language Week an opportunity for anyone to sign
    New Zealand Sign Language Week is an excellent opportunity for all Kiwis to give the language a go, Disabilities Issues Minister Louise Upston says. This week (May 6 to 12) is New Zealand Sign Language (NZSL) Week. The theme is “an Aotearoa where anyone can sign anywhere” and aims to ...
    BeehiveBy beehive.govt.nz
    4 days ago

  • Next stop NASA for New Zealand students
    Six tertiary students have been selected to work on NASA projects in the US through a New Zealand Space Scholarship, Space Minister Judith Collins announced today. “This is a fantastic opportunity for these talented students. They will undertake internships at NASA’s Ames Research Center or its Jet Propulsion Laboratory (JPL), where ...
    BeehiveBy beehive.govt.nz
    4 days ago

  • $1.9 billion investment to keep NZ safe from crime
    New Zealanders will be safer because of a $1.9 billion investment in more frontline Corrections officers, more support for offenders to turn away from crime, and more prison capacity, Corrections Minister Mark Mitchell says. “Our Government said we would crack down on crime. We promised to restore law and order, ...
    BeehiveBy beehive.govt.nz
    4 days ago

  • OECD reinforces need to control spending
    The OECD’s latest report on New Zealand reinforces the importance of bringing Government spending under control, Finance Minister Nicola Willis says. The OECD conducts country surveys every two years to review its members’ economic policies. The 2024 New Zealand survey was presented in Wellington today by OECD Chief Economist Clare Lombardelli.   ...
    BeehiveBy beehive.govt.nz
    5 days ago

  • Agreement delivers Local Water Done Well for Auckland
    The Government has delivered on its election promise to provide a financially sustainable model for Auckland under its Local Water Done Well plan. The plan, which has been unanimously endorsed by Auckland Council’s Governing Body, will see Aucklanders avoid the previously projected 25.8 per cent water rates increases while retaining ...
    BeehiveBy beehive.govt.nz
    6 days ago

  • Gaza and the Pacific on the agenda with Germany
    Foreign Minister Winston Peters discussed the need for an immediate ceasefire in Gaza, and enhanced cooperation in the Pacific with German Foreign Minister Annalena Baerbock during her first official visit to New Zealand today.    "New Zealand and Germany enjoy shared interests and values, including the rule of law, democracy, respect for the international system ...
    BeehiveBy beehive.govt.nz
    7 days ago

  • Decision allows for housing growth in Western Bay of Plenty
    The Minister Responsible for RMA Reform, Chris Bishop today released his decision on four recommendations referred to him by the Western Bay of Plenty District Council, opening the door to housing growth in the area. The Council’s Plan Change 92 allows more homes to be built in existing and new ...
    BeehiveBy beehive.govt.nz
    1 week ago

  • Speech to New Zealand China Council
    Thank you, John McKinnon and the New Zealand China Council for the invitation to speak to you today.    Thank you too, all members of the China Council. Your effort has played an essential role in helping to build, shape, and grow a balanced and resilient relationship between our two ...
    BeehiveBy beehive.govt.nz
    1 week ago

  • Modern insurance law will protect Kiwi households
    The Government is modernising insurance law to better protect Kiwis and provide security in the event of a disaster, Commerce and Consumer Affairs Minister Andrew Bayly announced today. “These reforms are long overdue. New Zealand’s insurance law is complicated and dated, some of which is more than 100 years old. ...
    BeehiveBy beehive.govt.nz
    1 week ago

  • Government recommits to equal pay
    The coalition Government is refreshing its approach to supporting pay equity claims as time-limited funding for the Pay Equity Taskforce comes to an end, Public Service Minister Nicola Willis says.  “Three years ago, the then-government introduced changes to the Equal Pay Act to support pay equity bargaining. The changes were ...
    BeehiveBy beehive.govt.nz
    1 week ago

  • Transforming how our children learn to read
    Structured literacy will change the way New Zealand children learn to read - improving achievement and setting students up for success, Education Minister Erica Stanford says.  “Being able to read and write is a fundamental life skill that too many young people are missing out on. Recent data shows that ...
    BeehiveBy beehive.govt.nz
    1 week ago

  • NZ not backing down in Canada dairy dispute
    Trade Minister Todd McClay says Canada’s refusal to comply in full with a CPTPP trade dispute ruling in our favour over dairy trade is cynical and New Zealand has no intention of backing down. Mr McClay said he has asked for urgent legal advice in respect of our ‘next move’ ...
    BeehiveBy beehive.govt.nz
    1 week ago

  • Stronger oversight for our most vulnerable children
    The rights of our children and young people will be enhanced by changes the coalition Government will make to strengthen oversight of the Oranga Tamariki system, including restoring a single Children’s Commissioner. “The Government is committed to delivering better public services that care for our most at-risk young people and ...
    BeehiveBy beehive.govt.nz
    1 week ago

  • Streamlining Building Consent Changes
    The Government is making it easier for minor changes to be made to a building consent so building a home is easier and more affordable, Building and Construction Minister Chris Penk says.      “The coalition Government is focused on making it easier and cheaper to build homes so we can ...
    BeehiveBy beehive.govt.nz
    1 week ago

  • Minister acknowledges passing of Sir Robert Martin (KNZM)
    New Zealand lost a true legend when internationally renowned disability advocate Sir Robert Martin (KNZM) passed away at his home in Whanganui last night, Disabilities Issues Minister Louise Upston says. “Our Government’s thoughts are with his wife Lynda, family and community, those he has worked with, the disability community in ...
    BeehiveBy beehive.govt.nz
    1 week ago

  • Speech to New Zealand Institute of International Affairs, Parliament – Annual Lecture: Challenges ...
    Good evening –   Before discussing the challenges and opportunities facing New Zealand’s foreign policy, we’d like to first acknowledge the New Zealand Institute of International Affairs. You have contributed to debates about New Zealand foreign policy over a long period of time, and we thank you for hosting us.  ...
    BeehiveBy beehive.govt.nz
    1 week ago

  • Accelerating airport security lines
    From today, passengers travelling internationally from Auckland Airport will be able to keep laptops and liquids in their carry-on bags for security screening thanks to new technology, Transport Minister Simeon Brown says. “Creating a more efficient and seamless travel experience is important for holidaymakers and businesses, enabling faster movement through ...
    BeehiveBy beehive.govt.nz
    1 week ago

  • Community hui to talk about kina barrens
    People with an interest in the health of Northland’s marine ecosystems are invited to a public meeting to discuss how to deal with kina barrens, Oceans and Fisheries Minister Shane Jones says. Mr Jones will lead the discussion, which will take place on Friday, 10 May, at Awanui Hotel in ...
    BeehiveBy beehive.govt.nz
    1 week ago

Page generated in The Standard by Wordpress at 2024-05-10T14:59:37+00:00