Nat techhead needs 3D brain transplant

Written By: - Date published: 8:16 am, February 28th, 2014 - 55 comments
Categories: crime, drugs - Tags: , , , ,

What can one say about Maurice Williamson. Is he really as much of a comedian as he appears. Well he pretty much had me in stitches of laughter yesterday morning heading to work.

I mean that it is good that he is looking at the downstream consequences before they arrive. But the examples he was using!

Mr Williamson says the printers are actually manufacturers of products and 3D computer files can be emailed or downloaded from the internet.

He says household printers will soon be able to produce drugs and weapons, and the country’s borders are extremely vulnerable.

“If people could print off … sheets of Ecstasy tablets at the party they’re at at that time, that just completely takes away our border protection role in its known sense.”

His contention is that with the development of 3d printers being so rapid, it isn’t going to be long before they become as ubiquitous as inkjets or laserjets in the hands of potential criminals (aka youth) who will be able to download sophisticated programs to attack him disrupt society. This shows a rather optimistic (ie fantastic) view of the capabilities of the devices, both current and into the foreseeable future. It also ignores that we already have equivalent technologies.

Weapons? The hardest part of any gun to make is  the barrel. This has to withstand the pressure of an explosion inside it for any chemically powered weapon. A gas powered weapon like a air gun is much the same albeit at lower pressures. If you get it wrong then you have a wee bomb in your hand. Sure in theory, a barrel could be made out of sintered metal powders. However the resulting barrel would scare the crap out of even a weapons freak like I have been over the years. Basically you’d want to fire it from remote control, even after it’d be tested many times.

And has Maurice Williamson looked at the costs of second hand CNC milling machines? They aren’t that expensive and they’re ideal for making gun barrels. They’ve been widespread in industrial and engineering plants since I was a kid and the name means “Computer Numerical Control“. In other words these days you typically download, modify, and install a program. Given some decent steel, you’d be able to roll out some pretty decent, cheap, and safe weapons just like a gunsmith I know.

Incidentally guns made out of plastic, wood, pipes, bamboo and many other materials has been around for a very long time. They have never been that popular because they are viewed by everyone who know weapons as being one-shots, and preferably fired from some distance away from our delicate bodies. Just like the glow of the Liberator 3D plastic gun, they are a interesting idea but bloody impractical for any purpose apart from posing.

liberator plastic gun

Or his example about drugs. Perhaps he should look at the do it yourself history of homebake in NZ.

Homebake can be manufactured from over-the-counter and prescription painkillers containing codeine, and was popular in the late 1970s to 1980s due to the crackdown on the heroin supply in this time period. It Is also commonly manufactured from morphine sulfate tablets as the morphine to diacetylmorphine reaction is much more simple than the codeine to morphine process. Clandestine drug laboratories established to homebake heroin have existed in New Zealand since the 1980s

This was eventually dealt with was with careful control of the active ingredients. Now if you look at the chemistry of MDMA, the active part of the drug Ecstasy:

Safrole, a colorless or slightly yellow oily liquid, extracted from the root-bark or the fruit of the sassafras tree is the primary precursor for all manufacture of MDMA.  There are numerous synthetic methods available in the literature to convert safrole into MDMA via different intermediates.

Relatively small quantities of essential oil are required to make large amounts of MDMA. The essential oil of Ocotea cymbarum typically contains between 80 and 94% safrole. This would allow 500 ml of the oil, which retails at between $20 and $100, to be used to produce between 150 and 340 grams of MDMA.

This does suggest to me that there is a much simpler route to control of ecstasy in NZ – the homebake style of control of the precursors. Typically most precursors require a pretty horrendous chemical transformation to be useful. MDMA for instance:-

800px-MDMA_Synthesis_1.svg

500px-MDMA_Synthese_2.svg

For those who didn’t have to suffer through university level organic chemistry (not my favourite subject), there are some pretty serious chemicals used in that synthesis. Each of which can be disrupted in the supply chain.

In theory of course a sufficiently advanced “printing” technology could assemble molecules from elemental atoms. But the probability of anything being capable of actually doing that at a reasonable cost within the next few generations is complete fantasy (probably drug induced).

Most drugs are the same. The active ingredients are usually derived from the natural world which is a lot further on than humans in how to assemble complex chemicals relatively cheaply and at low temperatures and pressures.  Having a drug in a refined form and merely printing it onto a substrate implies that the drug has already been manufactured or imported. Customs and other law enforcement should probably concentrate on those happening.

For that matter, in some ways it is harder to produce good ammunition than it is to produce guns. Perhaps customs and the police should look at how to improve border control on those.

The same thing applies for producing stem cell or cloned cell tissues, one of the more interesting technologies being explored with 3d printers. While it is tempting to consider creating some extra brain tissues to replace those already lost by decayed brain of Maurice Williamson. That too appears to be a long way away.

If you know where you are looking on the net and in the printed literature, you can find just about everything you need to do most things that are known technology already. You could even when I was a kid in the 60s using the Auckland War Memorial museum library to find out all of the interesting techniques used in guerilla warfare in World War 2.

But the really scary thing about this proposal is what Gareth Hughes said on frogblog:

The amazing thing is, Toby Manhire is probably right, it is terrifying he is one of the most qualified people in National to comment on tech issues.

Sure Labour politicians are, in my experience, an interesting mix of being either pretty damn technophobic or having an inept over-enthusiasm for it. But I get the impression that they’ve done some study and thinking on most tech areas I raise with them. However it’d be pretty clear to everyone who has followed 3D printing over the last decade that Maurice Williamson, National’s version of a techhead, appears to be clueless on it.

55 comments on “Nat techhead needs 3D brain transplant ”

  • Comments are now closed

  1. One Anonymous Bloke 1
    28 February 2014 at 8:44 am

    You forgot the potato cannon.

    Williamson should probably take a look at people selling 3D CAD software too, in case it fell into the wrong hands.

  2. karol 2
    28 February 2014 at 8:56 am

    I see the Stuff article by Alex Fensome yesterday is taking the Maurice Williamson line: headline “Printers capable of making guns”.

    Three-dimensional printers can already make guns, and may soon allow people to create gold, gems, food or drugs in their living rooms, the Customs Service has warned.

    It suggests the law needs to be changed to control importing designs for restricted or prohibited goods in the same way as child pornography is restricted.

    A report obtained under the Official Information Act says 3D printers have already been used for criminal activity and to create weapons. In Australia, one was used to make a working “card skimmer” device, which could steal credit card details

    So, while I usually consider Lynn to know way more than me on such matters, I wondered if he had got it wrong with this post, so looked further.

    Today, Alex Fensome in the Dom Post seems to have had a change of heart, having attended to some experts on the matter: “No smoking gun with 3-D printers, experts say”

    The founder of 3-D printer supplier MindKits, Tim Carr, said criticism of the new technology was “infuriating” and 3-D-printed guns posed more of a threat to the person firing it than their target.

    There were much more simple ways to build a gun: “A lathe is more deadly . . . I wouldn’t want to fire a gun made from a 3-D printer. There are so many easier ways to make something more lethal.”

    And a Guardian article from November last year explains just how difficult it is to make a safe-to-use gun from 3 D printing:

    Solid Concepts says that the gun comprised of over 30 3D printed components in stainless steel and a nickel-chromium based superalloy is capable of hitting “a few bulleyes at over 30 yards.”

    However, Solid Concepts stressed that this kind of metal gun cannot be printed using desktop machines – only by using an industrial printer that costs “more than my college tuition”, according to Alyssa Parkinson of Solid Concepts.

    It would have saved me time if I’d just gone with Lynn’s explanation to start with. Clearly he knows way more than Williamson about it, even though Williamson claims to have read up on the matter.

    • Lanthanide 2.1
      28 February 2014 at 9:14 am

      The line about “creating” gold, gems, food or drugs is just mind-boggling.

      • One Anonymous Bloke 2.1.1
        28 February 2014 at 9:19 am

        One quark at a time, presumably.

        • Murray Olsen 2.1.1.1
          1 March 2014 at 2:32 am

          Been a while since I’ve done any particle physics, but I thought quarks couldn’t be isolated because of a detail called asymptotic freedom. Since it has “freedom” in the name, I would have expected NAct to know that.

      • karol 2.1.2
        28 February 2014 at 9:21 am

        Kind of like the ancient art of alchemy.

        • One Anonymous Bloke 2.1.2.1
          28 February 2014 at 9:32 am

          These days, transmuting elements (the alchemical grail) is routine in particle and nuclear physics.

          • lprent 2.1.2.1.1
            28 February 2014 at 1:14 pm

            Just freaking expensive because of the energy and capital requirements.

            • One Anonymous Bloke 2.1.2.1.1.1
              28 February 2014 at 1:44 pm

              Nah, it’s actually cheap, but the scientists involved are part of the Al Gore conspiracy so they funnel the money straight to a secret standing army the UN is building. Luckily we have the Masters of Cyberspace to protect us.

          • McFlock 2.1.2.1.2
            28 February 2014 at 1:31 pm

            Indeed, we can even make antimatter.

            And damned teens could use that to make 10megaton bombs to blow up their school.

            As long as they can afford the $5,200,000,000,000 a gram cost, of course. But it’s something we should be scared of right now.

        • freedom 2.1.2.2
          28 February 2014 at 9:42 am

          There really are people out there who believe 3D printers are some sort of Star Trek molecular synthesiser. (I imagine they are the same people who believe National are paying down debt) But let’s be honest here, if 3D printers had any of that potential they would more closely resemble something from the Sirius Cybernetics Corporation.

          When the ‘Drink’ button is pressed it makes an instant but highly detailed examination of the subject’s taste buds, a spectroscopic analysis of the subject’s metabolism, and then sends tiny experimental signals down the neural pathways to the taste centres of the subject’s brain to see what is likely to be well received.

          However, no-one knows quite why it does this because it then invariably delivers a cupful of liquid that is almost, but not quite, entirely unlike tea.

      • lprent 2.1.3
        28 February 2014 at 1:13 pm

        The line about “creating” gold, gems, food or drugs is just mind-boggling.

        Yep, with gold, the idea of doing some kind of nuclear fusion in a 3D printer is something that I don’t think even the extreme adherent of the technology would think was possible.

        I think they may have gotten it mixed up with the idea of the “Philosophers Stone“

        • Murray Olsen 2.1.3.1
          1 March 2014 at 2:35 am

          The new ACT leader probably thinks the philosophers stone is the currency paid between close relatives for commercial sex.

    • KJT 2.2
      28 February 2014 at 9:28 am

      My high school tech class in the 70’s was making crossbows. Not something which would be allowed now.

      The bolt could go through a small tree at close range.

      The technology, and that to make gun barrels, is available in every engineering workshop in the country.

      Don’t tell Williamson. He will probably want to ban lathes.

      Don’t need fancy 3D printing technology.

      Williamson has always had a fairly loose grasp on reality. Apparent ever since he told farmers that, “opening up the coast” would cause the shipping cartels to lower freight rates.

      • weka 2.2.1
        28 February 2014 at 10:39 am

        “The technology, and that to make gun barrels, is available in every engineering workshop in the country.”

        While I agree that Williamson is being an idiot, I don’t think this comparison fits. The technology to make a gun exists within NZ, but the people capable of using that tech are relatively small compared to the idea that anyone could press a button and print off something dangerous without having to learn any kind of skill. That’s what is scaring the likes of Williamson.

        What annoys me most about Williamson’s ignorance and paranoia is it creates a backlash that carries an implied meme that 3D printing and all new technology is always good for us.

        • lprent 2.2.1.1
          28 February 2014 at 1:35 pm

          …that carries an implied meme that 3D printing … is always good for us.

          In the case of 3D printing as in what is feasible for the next couple of decades, I suspect that it is.

          Consider that I cannot think of a case where a 3D printer could be used as a production line tool. They are simply too slow at making stuff compared to any kind of mass production technique. For instance in plastics materials (the most likely immediate usage), they’d be competing against injection moulding and plastic extrusion/blowing.

          They manufacture large and small objects in a time period that can be counted in seconds. At best for the next couple of decades it is likely that 3D printing equivalent will be measured in hours, and in the case of home equipment the sizes will be pretty small.It will also be correspondingly expensive.

          What 3D printing is damn good at (and how it is used where I work) is making bespoke one-offs. For instance if we need a new design for a electronics case we get one made for us from our CAD designs. While it costs a lot, it allows us to test a design in prototype practice (often several times) before we commit to paying the 10s of thousands of dollars to make a injection die. Before 3D printing we simply wouldn’t have done that degree of testing.

          What it does is reduce our risks, time to production, and time to market.

          The same economics applies in almost every other usage I know of for 3D printing (except possibly for the emerging field of growing biological tissues)

          • Draco T Bastard 2.2.1.1.1
            28 February 2014 at 4:00 pm

            Consider that I cannot think of a case where a 3D printer could be used as a production line tool.

            GE and Rolls Royce can. Of course, that sort of capability isn’t in the at home type of 3D printer – yet.

            At best for the next couple of decades it is likely that 3D printing equivalent will be measured in hours, and in the case of home equipment the sizes will be pretty small.

            Depending upon what’s being created hours may actually be a hell of a lot faster than present methods. As for size, well, this.

            It’s still an emergent technology but I don’t think it’s decades away.

        • KJT 2.2.1.2
          28 February 2014 at 1:48 pm

          Umm. The skills exists in just about anyone who passed 5th form metalwork.

          Not so much now as the academics have this fantasy, that technology is simply to educate designers to design for the Chinese makers.
          The fact that we need about 1 designer for every hundred makers, and the Chinese have plenty of their own, seems to have escaped them.

        • Draco T Bastard 2.2.1.3
          28 February 2014 at 3:43 pm

          but the people capable of using that tech are relatively small compared to the idea that anyone could press a button and print off something dangerous without having to learn any kind of skill. That’s what is scaring the likes of Williamson.

          Nope. What’s scaring the likes of Williamson is that mega-corporations are becoming obsolete. 3D printers will giver everyone the ability to experiment and produce products at home.

          Capitalists are absolutely terrified of competition and 3D printers represent almost unlimited competition.

          • weka 2.2.1.3.1
            28 February 2014 at 6:16 pm

            True. But I also think this is a dog whistle to people* that don’t think like that and instead would be scared of the masses being able to make a gun or drugs at home.

            *I was going to say middle NZ but I’m really sick of that expression and its vagueness.

            • Draco T Bastard 2.2.1.3.1.1
              28 February 2014 at 6:48 pm

              That’s certainly how it’s framed but as bad12 points out, there’s just not that many people who want a gun.

          • lprent 2.2.1.3.2
            28 February 2014 at 9:16 pm

            They really are awesome for prototyping.

  3. felix 3
    28 February 2014 at 9:19 am

    “Having a drug in a refined form and merely printing it onto a substrate implies that the drug has already been manufactured or imported. Customs and other law enforcement should probably concentrate on those happening.”

    Actually I can think of far more important things they should be concentrating on. Why should ecstasy be any concern to them?

    • lprent 3.1
      28 February 2014 at 1:42 pm

      There is always that issue. Personally I have always been of the mind that virtually all recreational drugs should be treated like tobacco and alcohol should be. Legal, regulated strongly (including limited or no advertising), and taxed like buggery to pay for mitigating downstream harm and a good proportion of the money gathered used for explaining the downsides of use.

      Probably wouldn’t stop me from drinking, the only vice that I currently do after I had to give up my tobacco addiction after a heart attack..

      • Lloyd 3.1.1
        1 March 2014 at 12:08 am

        Recreational drugs should be like driving. Driving is potentially dangerous. So is taking drugs.

        Alcohol is a recreational drug, so any rules for other drugs would need to be applied to alcohol too.

        Drivers are tested on their knowledge and have their licence taken off them when they are shown to be too dangerous to leave on the road. Drug takers would need to pass knowledge test(s) about their drug(s) of choice and should have their licence removed when they are shown to be incapable of taking the drug of choice without harming either them selves or others around them.

        Legal drugs would be much cheaper if sold at cost by the state. (Remember state control of alcohol as a choice in elections?) Supply of drugs would need to be absolutely connected to the drug taking licence. Lose your licence and no more drugs. State provided cheap recreational drugs would take any profit in drug dealing away from gangs.

        Random health tests would be a part of the drug licence regime, show signs of serious health effects and you lose your licence. Possession of a licence for certain drugs would mean that certain jobs and probably possession of a driving licence would need to be given up.

        Money spent today on drug squads would be far better spent on health check teams, and extra funding for this could come from the licencing system and drug sales.

  4. One Anonymous Bloke 4
    28 February 2014 at 9:33 am

    It’s sad in a way. The man who gave us the big gay rainbow is clearly a buffoon of the highest order.

    • RedLogix 4.1
      28 February 2014 at 11:04 am

      Yes. It’s not hard to sound plausible when espousing a political ideology – matter how much of a zombie it is.

      Reality is however their undoing.

    • Lanthanide 4.2
      28 February 2014 at 12:19 pm

      I would have thought his comments about big gay rainbows would already have made that clear.

      Sure, maybe it’s a nice soundbite and catchy, but it’s not actually clever or really all that witty.

  5. bad12 5
    28 February 2014 at 9:48 am

    Why anyone would want to indulge in even attempting to ‘print a gun’ off of some laser printer in this country is beyond me,

    If i had a mind to,and i don’t(honest,please believe me),i am pretty sure i could score a working pump action shotgun with the necessary pills to create mayhem in under 2 hours,

    An illegal AK47 would take a couple of days and assembling an arsenal too bulky to carry probably about a week,

    This place is awash with firearms so making dodgy plastic imitations would seem more an item of ‘news’ for its novelty than any actual ability to produce one off of a printer that would have any use other than as a decoration would seem a waste of time and money…

    • weka 5.1
      28 February 2014 at 10:42 am

      That misses the point bad. It’s not the few people like you, it’s the masses that will be able to buy printers.

      • bad12 5.1.1
        28 February 2014 at 12:39 pm

        The day a ‘printer’ can produce gunpowder,a necessary component of a bullet, unless all these masses of printed firearms are to be gas operated, i won’t eat my hat coz i have better uses for it,but, i will be sufficiently contrite,

        The Masses, weka, in case you havn’t noticed need only apply for a firearms license and sit a simple test to enable them access to real fire-arms,

        Hell i know a few who can barely read the Queens English and they have passed the test, as the Post points out a firearm complete with all working parts might be able to be copied in plastic but try firing a bullet out of it and see what occurs…

        • McFlock 5.1.1.1
          28 February 2014 at 1:46 pm

          “gunpowder” is a piece of piss, as it were.

          And teens were making “zip guns” in the 1950s

          • bad12 5.1.1.1.1
            28 February 2014 at 2:14 pm

            A further explanation Mac is definitely needed to show how gunpowder can be produced using a ‘printer’, i would suggest it cannot and would have to be inserted in the ‘cartridge’ with which such a printer would actually print,

            i agree with the Posts author on the fact that plastic is not of sufficient strength be able to escape the explosive forces of discharge and remain intact,

            Yeah sure, i was making bolt-bombs out of match-heads and steel razors in my Borstal years, tossed out the cells air-vent in a two storey cell block they were quite an effective tool for intimidating the night patrol screws with the various bits of steel zinging off the confined space a number of times even with such small explosive force…

            • McFlock 5.1.1.1.1.1
              28 February 2014 at 2:18 pm

              You might as well ask how cooked pancakes can be produced using a ‘printer’.

              why use a printer? I made it as a kid at home. Two of the ingredients are easily obtainable, another is moderately-easily obtainable. The trick is in the ratios and mixing process, easily available online and used 700 years ago.

              Easy to make it go boom.

              • KJT …
                28 February 2014 at 2:32 pm

                I think our collective point is there is much easier, simpler and better known ways of making effective weapons than using 3D printers.

                And, even if they were effective, despite the knowledge, equipment and skills being common out there, very few people do make weapons. Apart from hobbyists, like black powder clubbers, who have no intention of using them illegally.

              • Draco T Bastard …
                28 February 2014 at 4:15 pm

                why use a printer?

                Caseless ammunition

            • greywarbler 5.1.1.1.1.2
              28 February 2014 at 3:02 pm

              bad12
              Sounds like fun, diversion and revenge in a package.

          • KJT 5.1.1.1.2
            28 February 2014 at 2:22 pm

            And first year University engineering gives enough knowledge to make “composite” (plastic) guns.

            I will stop on this subject before the GCSB get interested.

        • Draco T Bastard 5.1.1.2
          28 February 2014 at 4:08 pm

          Airgun

          In the 17th century, air guns, in calibers .30–.51, were used to hunt big game deer and wild boar. These air rifles were charged using a pump to fill an air reservoir and gave velocities from 650 to 1,000 feet per second (200–300 m/s). They were also used in warfare; the most recognized example being the Girandoni Military Repeating Air Rifle.

          I have NFI why some people think that airguns aren’t dangerous.

  6. captain hook 6
    28 February 2014 at 12:59 pm

    this is all hypothetical mush designed to sell newspapers and distract voters from the real issues.
    Where are the jobs and why is the National Party intent on wrecking the education system.
    all the rest is piffle.

  7. Rich 7
    28 February 2014 at 1:18 pm

    there is a much simpler route to control of ecstasy in NZ

    Legalise it and sell it in Cosmic?

    I can’t believe how Kathryn Ryan didn’t pick Williamson up on anything he said: like surely if someone says printing a gun is possible, then the obvious question is “but can you print any ammunition”. (Making and handling a primary explosive is a fairly difficult process on a non-industrial scale).

    Then there was the “I read this in a magazine” and the “making gold”.

    • freedom 7.1
      28 February 2014 at 1:35 pm

      “I can’t believe how Kathryn Ryan didn’t pick Williamson up on anything he said”

      A week ago Kathryn Ryan had the PM sitting there talking about how dangerous the 10 billion dollar debt left by Labour was, and somehow forgot to ask the PM about the 60 billion dollar debt National have created ???

      *shakes head, walks away muttering *

  8. fender 8
    28 February 2014 at 1:46 pm

    Williamson has been having too much fun printing his own supply of acid trips.

    I’m more concerned about the Nats printing off caucus members without proper quality control measures in place..

  9. Tracey 9
    28 February 2014 at 2:45 pm

    makes you wonder what maurice really meant by the big gay rainbow.

  10. xtasy 10
    28 February 2014 at 10:49 pm

    Nooooo brain transplant for Nat techheads, please, they may get some “ideas” after all, no, thanks!

Recent Comments

Recent Posts

  • Community hui to talk about kina barrens
    People with an interest in the health of Northland’s marine ecosystems are invited to a public meeting to discuss how to deal with kina barrens, Oceans and Fisheries Minister Shane Jones says. Mr Jones will lead the discussion, which will take place on Friday, 10 May, at Awanui Hotel in ...
    BeehiveBy beehive.govt.nz
    6 hours ago

  • Kiwi exporters win as NZ-EU FTA enters into force
    Kiwi exporters are $100 million better off today with the NZ EU FTA entering into force says Trade Minister Todd McClay. “This is all part of our plan to grow the economy. New Zealand's prosperity depends on international trade, making up 60 per cent of the country’s total economic activity. ...
    BeehiveBy beehive.govt.nz
    6 hours ago

  • Mining resurgence a welcome sign
    There are heartening signs that the extractive sector is once again becoming an attractive prospect for investors and a source of economic prosperity for New Zealand, Resources Minister Shane Jones says. “The beginnings of a resurgence in extractive industries are apparent in media reports of the sector in the past ...
    BeehiveBy beehive.govt.nz
    8 hours ago

  • Ō-Rākau Remembrance Bill passes first reading
    The return of the historic Ō-Rākau battle site to the descendants of those who fought there moved one step closer today with the first reading of Te Pire mō Ō-Rākau, Te Pae o Maumahara / The Ō-Rākau Remembrance Bill. The Bill will entrust the 9.7-hectare battle site, five kilometres west ...
    BeehiveBy beehive.govt.nz
    22 hours ago

  • Government to boost public EV charging network
    Energy Minister Simeon Brown has announced 25 new high-speed EV charging hubs along key routes between major urban centres and outlined the Government’s plan to supercharge New Zealand’s EV infrastructure.  The hubs will each have several chargers and be capable of charging at least four – and up to 10 ...
    BeehiveBy beehive.govt.nz
    22 hours ago

  • Residential Property Managers Bill to not progress
    The coalition Government will not proceed with the previous Government’s plans to regulate residential property managers, Housing Minister Chris Bishop says. “I have written to the Chairperson of the Social Services and Community Committee to inform him that the Government does not intend to support the Residential Property Managers Bill ...
    BeehiveBy beehive.govt.nz
    23 hours ago

  • Independent review into disability support services
    The Government has announced an independent review into the disability support system funded by the Ministry of Disabled People – Whaikaha. Disability Issues Minister Louise Upston says the review will look at what can be done to strengthen the long-term sustainability of Disability Support Services to provide disabled people and ...
    BeehiveBy beehive.govt.nz
    1 day ago

  • Justice Minister updates UN on law & order plan
    Justice Minister Paul Goldsmith has attended the Universal Periodic Review in Geneva and outlined the Government’s plan to restore law and order. “Speaking to the United Nations Human Rights Council provided us with an opportunity to present New Zealand’s human rights progress, priorities, and challenges, while responding to issues and ...
    BeehiveBy beehive.govt.nz
    1 day ago

  • Ending emergency housing motels in Rotorua
    The Government and Rotorua Lakes Council are committed to working closely together to end the use of contracted emergency housing motels in Rotorua. Associate Minister of Housing (Social Housing) Tama Potaka says the Government remains committed to ending the long-term use of contracted emergency housing motels in Rotorua by the ...
    BeehiveBy beehive.govt.nz
    1 day ago

  • Trade Minister travels to Riyadh, OECD, and Dubai
    Trade Minister Todd McClay heads overseas today for high-level trade talks in the Gulf region, and a key OECD meeting in Paris. Mr McClay will travel to Riyadh to meet with counterparts from Saudi Arabia and the Gulf Cooperation Council (GCC). “New Zealand’s goods and services exports to the Gulf region ...
    BeehiveBy beehive.govt.nz
    2 days ago

  • Education priorities focused on lifting achievement
    Education Minister Erica Stanford has outlined six education priorities to deliver a world-leading education system that sets Kiwi kids up for future success. “I’m putting ambition, achievement and outcomes at the heart of our education system. I want every child to be inspired and engaged in their learning so they ...
    BeehiveBy beehive.govt.nz
    2 days ago

  • NZTA App first step towards digital driver licence
    The new NZ Transport Agency (NZTA) App is a secure ‘one stop shop’ to provide the services drivers need, Transport Minister Simeon Brown and Digitising Government Minister Judith Collins say.  “The NZTA App will enable an easier way for Kiwis to pay for Vehicle Registration and Road User Charges (RUC). ...
    BeehiveBy beehive.govt.nz
    2 days ago

  • Supporting whānau out of emergency housing
    Whānau with tamariki growing up in emergency housing motels will be prioritised for social housing starting this week, says Associate Housing Minister Tama Potaka. “Giving these whānau a better opportunity to build healthy stable lives for themselves and future generations is an essential part of the Government’s goal of reducing ...
    BeehiveBy beehive.govt.nz
    2 days ago

  • Tribute to Dave O'Sullivan
    Racing Minister Winston Peters has paid tribute to an icon of the industry with the recent passing of Dave O’Sullivan (OBE). “Our sympathies are with the O’Sullivan family with the sad news of Dave O’Sullivan’s recent passing,” Mr Peters says. “His contribution to racing, initially as a jockey and then ...
    BeehiveBy beehive.govt.nz
    2 days ago

  • Speech – Eid al-Fitr
    Assalaamu alaikum, greetings to you all. Eid Mubarak, everyone! I want to extend my warmest wishes to you and everyone celebrating this joyous occasion. It is a pleasure to be here. I have enjoyed Eid celebrations at Parliament before, but this is my first time joining you as the Minister ...
    BeehiveBy beehive.govt.nz
    2 days ago

  • Government saves access to medicines
    Associate Health Minister David Seymour has announced Pharmac’s largest ever budget of $6.294 billion over four years, fixing a $1.774 billion fiscal cliff.    “Access to medicines is a crucial part of many Kiwis’ lives. We’ve committed to a budget allocation of $1.774 billion over four years so Kiwis are ...
    BeehiveBy beehive.govt.nz
    2 days ago

  • Pharmac Chair appointed
    Hon Paula Bennett has been appointed as member and chair of the Pharmac board, Associate Health Minister David Seymour announced today. "Pharmac is a critical part of New Zealand's health system and plays a significant role in ensuring that Kiwis have the best possible access to medicines,” says Mr Seymour. ...
    BeehiveBy beehive.govt.nz
    3 days ago

  • Taking action on Fetal Alcohol Spectrum Disorder
    Hundreds of New Zealand families affected by Fetal Alcohol Spectrum Disorder (FASD) will benefit from a new Government focus on prevention and treatment, says Health Minister Dr Shane Reti. “We know FASD is a leading cause of preventable intellectual and neurodevelopmental disability in New Zealand,” Dr Reti says.  “Every day, ...
    BeehiveBy beehive.govt.nz
    4 days ago

  • New sports complex opens in Kaikohe
    Regional Development Minister Shane Jones today attended the official opening of Kaikohe’s new $14.7 million sports complex. “The completion of the Kaikohe Multi Sports Complex is a fantastic achievement for the Far North,” Mr Jones says. “This facility not only fulfils a long-held dream for local athletes, but also creates ...
    BeehiveBy beehive.govt.nz
    4 days ago

  • Diplomacy needed more than ever
    Foreign Minister Winston Peters’ engagements in Türkiye this week underlined the importance of diplomacy to meet growing global challenges.    “Returning to the Gallipoli Peninsula to represent New Zealand at Anzac commemorations was a sombre reminder of the critical importance of diplomacy for de-escalating conflicts and easing tensions,” Mr Peters ...
    BeehiveBy beehive.govt.nz
    4 days ago

  • Anzac Commemorative Address, Buttes New British Cemetery Belgium
    Ambassador Millar, Burgemeester, Vandepitte, Excellencies, military representatives, distinguished guests, ladies and gentlemen – good morning and welcome to this sacred Anzac Day dawn service.  It is an honour to be here on behalf of the Government and people of New Zealand at Buttes New British Cemetery, Polygon Wood – a deeply ...
    BeehiveBy beehive.govt.nz
    5 days ago

  • Anzac Commemorative Address – NZ National Service, Chunuk Bair
    Distinguished guests -   It is an honour to return once again to this site which, as the resting place for so many of our war-dead, has become a sacred place for generations of New Zealanders.   Our presence here and at the other special spaces of Gallipoli is made ...
    BeehiveBy beehive.govt.nz
    6 days ago

  • Anzac Commemorative Address – Dawn Service, Gallipoli, Türkiye
    Mai ia tawhiti pamamao, te moana nui a Kiwa, kua tae whakaiti mai matou, ki to koutou papa whenua. No koutou te tapuwae, no matou te tapuwae, kua honoa pumautia.   Ko nga toa kua hinga nei, o te Waipounamu, o te Ika a Maui, he okioki tahi me o ...
    BeehiveBy beehive.govt.nz
    6 days ago

  • PM announces changes to portfolios
    Paul Goldsmith will take on responsibility for the Media and Communications portfolio, while Louise Upston will pick up the Disability Issues portfolio, Prime Minister Christopher Luxon announced today. “Our Government is relentlessly focused on getting New Zealand back on track. As issues change in prominence, I plan to adjust Ministerial ...
    BeehiveBy beehive.govt.nz
    1 week ago

  • New catch limits for unique fishery areas
    Recreational catch limits will be reduced in areas of Fiordland and the Chatham Islands to help keep those fisheries healthy and sustainable, Oceans and Fisheries Minister Shane Jones says. The lower recreational daily catch limits for a range of finfish and shellfish species caught in the Fiordland Marine Area and ...
    BeehiveBy beehive.govt.nz
    1 week ago

  • Minister welcomes hydrogen milestone
    Energy Minister Simeon Brown has welcomed an important milestone in New Zealand’s hydrogen future, with the opening of the country’s first network of hydrogen refuelling stations in Wiri. “I want to congratulate the team at Hiringa Energy and its partners K one W one (K1W1), Mitsui & Co New Zealand ...
    BeehiveBy beehive.govt.nz
    1 week ago

  • Urgent changes to system through first RMA Amendment Bill
    The coalition Government is delivering on its commitment to improve resource management laws and give greater certainty to consent applicants, with a Bill to amend the Resource Management Act (RMA) expected to be introduced to Parliament next month. RMA Reform Minister Chris Bishop has today outlined the first RMA Amendment ...
    BeehiveBy beehive.govt.nz
    1 week ago

  • Overseas decommissioning models considered
    Overseas models for regulating the oil and gas sector, including their decommissioning regimes, are being carefully scrutinised as a potential template for New Zealand’s own sector, Resources Minister Shane Jones says. The Coalition Government is focused on rebuilding investor confidence in New Zealand’s energy sector as it looks to strengthen ...
    BeehiveBy beehive.govt.nz
    1 week ago

  • Release of North Island Severe Weather Event Inquiry
    Emergency Management and Recovery Minister Mark Mitchell has today released the Report of the Government Inquiry into the response to the North Island Severe Weather Events. “The report shows that New Zealand’s emergency management system is not fit-for-purpose and there are some significant gaps we need to address,” Mr Mitchell ...
    BeehiveBy beehive.govt.nz
    1 week ago

  • Justice Minister to attend Human Rights Council
    Justice Minister Paul Goldsmith is today travelling to Europe where he’ll update the United Nations Human Rights Council on the Government’s work to restore law and order.  “Attending the Universal Periodic Review in Geneva provides us with an opportunity to present New Zealand’s human rights progress, priorities, and challenges, while ...
    BeehiveBy beehive.govt.nz
    1 week ago

  • Patterson reopens world’s largest wool scouring facility
    Associate Agriculture Minister, Mark Patterson, formally reopened the world’s largest wool processing facility today in Awatoto, Napier, following a $50 million rebuild and refurbishment project. “The reopening of this facility will significantly lift the economic opportunities available to New Zealand’s wool sector, which already accounts for 20 per cent of ...
    BeehiveBy beehive.govt.nz
    1 week ago

  • Speech to the Southland Otago Regional Engineering Collective Summit, 18 April 2024
    Hon Andrew Bayly, Minister for Small Business and Manufacturing  At the Southland Otago Regional Engineering Collective (SOREC) Summit, 18 April, Dunedin    Ngā mihi nui, Ko Andrew Bayly aho, Ko Whanganui aho    Good Afternoon and thank you for inviting me to open your summit today.    I am delighted ...
    BeehiveBy beehive.govt.nz
    1 week ago

  • Government to introduce revised Three Strikes law
    The Government is delivering on its commitment to bring back the Three Strikes legislation, Associate Justice Minister Nicole McKee announced today. “Our Government is committed to restoring law and order and enforcing appropriate consequences on criminals. We are making it clear that repeat serious violent or sexual offending is not ...
    BeehiveBy beehive.govt.nz
    1 week ago

  • New diplomatic appointments
    Foreign Minister Winston Peters has today announced four new diplomatic appointments for New Zealand’s overseas missions.   “Our diplomats have a vital role in maintaining and protecting New Zealand’s interests around the world,” Mr Peters says.    “I am pleased to announce the appointment of these senior diplomats from the ...
    BeehiveBy beehive.govt.nz
    1 week ago

  • Humanitarian support for Ethiopia and Somalia
    New Zealand is contributing NZ$7 million to support communities affected by severe food insecurity and other urgent humanitarian needs in Ethiopia and Somalia, Foreign Minister Rt Hon Winston Peters announced today.   “Over 21 million people are in need of humanitarian assistance across Ethiopia, with a further 6.9 million people ...
    BeehiveBy beehive.govt.nz
    1 week ago

  • Arts Minister congratulates Mataaho Collective
    Minister for Arts, Culture and Heritage Paul Goldsmith is congratulating Mataaho Collective for winning the Golden Lion for best participant in the main exhibition at the Venice Biennale. "Congratulations to the Mataaho Collective for winning one of the world's most prestigious art prizes at the Venice Biennale.  “It is good ...
    BeehiveBy beehive.govt.nz
    1 week ago

  • Supporting better financial outcomes for Kiwis
    The Government is reforming financial services to improve access to home loans and other lending, and strengthen customer protections, Commerce and Consumer Affairs Minister Andrew Bayly and Housing Minister Chris Bishop announced today. “Our coalition Government is committed to rebuilding the economy and making life simpler by cutting red tape. We are ...
    BeehiveBy beehive.govt.nz
    1 week ago

  • Trade relationship with China remains strong
    “China remains a strong commercial opportunity for Kiwi exporters as Chinese businesses and consumers continue to value our high-quality safe produce,” Trade and Agriculture Minister Todd McClay says.   Mr McClay has returned to New Zealand following visits to Beijing, Harbin and Shanghai where he met ministers, governors and mayors and engaged in trade and agricultural events with the New ...
    BeehiveBy beehive.govt.nz
    1 week ago

  • PM’s South East Asia mission does the business
    Prime Minister Christopher Luxon has completed a successful trip to Singapore, Thailand and the Philippines, deepening relationships and capitalising on opportunities. Mr Luxon was accompanied by a business delegation and says the choice of countries represents the priority the New Zealand Government places on South East Asia, and our relationships in ...
    BeehiveBy beehive.govt.nz
    2 weeks ago

  • $41m to support clean energy in South East Asia
    New Zealand is demonstrating its commitment to reducing global greenhouse emissions, and supporting clean energy transition in South East Asia, through a contribution of NZ$41 million (US$25 million) in climate finance to the Asian Development Bank (ADB)-led Energy Transition Mechanism (ETM). Prime Minister Christopher Luxon and Climate Change Minister Simon Watts announced ...
    BeehiveBy beehive.govt.nz
    2 weeks ago

Page generated in The Standard by Wordpress at 2024-05-01T03:30:43+00:00